The new multiple output dimmable driver is specifically designed to power large lighting installations while meeting strict CLASS 2 electrical regulations.
BLAZE High Output Strip Light has twice as many LED bulbs as the FLUID VIEW Strip Light, so it offers twice the brightness. It has the same ultra-low profile as the FLUID VIEW strips, which means it will fit in almost any lighting installation. This light is only one third of an inch wide and one tenth of an inch high, and comes with a 3M adhesive backing that ensures easy mounting virtually anywhere.
FLUID VIEW Wet Location Strip Light is commercial-grade strip designed for outdoor and indoor home and business use and is waterproof (but not submersible) with a wet location rating of IP68. Drawing only 1.44 watts of power per foot, these dimmable strips are extremely energy-efficient.
This strip has twice as many LED chips as the FLUID VIEW Strip Light, so it offers twice the brightness. It has the same ultra-low profile as the FLUID VIEW strips, which means it will fit in almost any lighting installation. This flat strip is only a quarter inch high by a third of an inch wide, so it can be installed in many small or difficult locations, whether indoors or outdoors.
Double BLAZE™ LED Strip Light is a super bright LED strip that is twice as bright as our BLAZE™ LED Strip Light and four times as bright as FLUID VIEW LED Strip Light. This LED tape light is our brightest strip and features two parallel rows of densely-packed, high output LED lights.
The FLUID VIEW Strip Light is a light fixture that has it all. It’s cuttable to a custom length and dimmable. It’s extremely low-profile, at a tenth of an inch high and third of an inch wide, so it can be used virtually anywhere. It’s a 12V fixture that draws less than 1.5 Watts per foot, so it’s very economical. To top it off, it comes in a rainbow of colors: warm white, cool white, amber, pink, red, green, blue, and purple.
K-RANGE High Output Tunable Color Strip Light gives you total control over the white color temperature of your LED lighting. With the K-RANGE Dual Slide Switch you can choose the exact color temperature you desire.
This strip light’s low profile and narrow width allows uses in many discreet locations. The height of the SIDEWINDER Vertical Strip Light is a mere 0.2 inches, so it will fit virtually anywhere, with a 3M™ adhesive backing that permits easy mounting. The flat-style 12V LEDs cast light sideways at a 90 degree angle from the strip surface, instead of straight out like all other Diode LED strip lights.
A super bright 24V DC LED strip that is 50% brighter than BLAZE High Output Strip Light and four times as bright as FLUID VIEW Strip Light. The ULTRA BLAZE 24V High Output Strip Light is packed with high power 5050 tri-chip surface mount diode (SMD) LEDs that combine to make a brighter, more value-driven, and warmer light than any fluorescent or incandescent fixture.
A super bright 12V DC LED strip that is 50% brighter than BLAZE High Output Strip Light and four times as bright as FLUID VIEW Strip Light.
The 12V Hard-Wired Dimmable Driver is a steady low voltage power driver perfect for dimming LED lights without flickering. This transformer can power any of our dimmable LED lights while using an existing household dimmer. There's no need to rewire your kitchen cabinets or living room lights, just tap into the high voltage AC power near where you intend to install your energy-efficient LED product.
The Array™ Inline Dimmer is made especially for the Array™ 24V Linkable Light Bars and is the perfect low profile control system for your Array Bar configuration. With the same dimensions as the Array bar, it attaches seamlessly into any array installation and is easy to use.
The 24V Listed Hard-Wired Dimmable Driver is a steady low voltage power driver perfect for dimming LED lights without flickering, whether indoors or in a protected location outdoors. This transformer can power any of our dimmable LED lights while using an existing household dimmer. There’s no need to rewire your kitchen cabinets or living room lights, just tap into the high voltage AC power near where you intend to install your energy-efficient LED product. And this driver has no minimum load requirement.
An excellent substitute for hot halogen and unsightly fluorescent lighting, the CAST LED Puck Light is a slim, modern, and earth-friendly indoor light fixture. CAST LED Puck Lights are available in two versions: dimmable and non-dimmable. This puck light is perfect for all recessed cabinet and under cabinet lighting, as well as furniture, shelf, display-case, and accent lighting. Producing 270 lumens of light output while consuming a mere 3.6 Watts of electricity, the CAST LED Puck Light is your brightest option available.
CAST LED Puck Light Kits are a quick and easy way to get everything you need for an LED lighting installation. Each plug-and-play kit includes LED lights, a Plug-In Adapter, an Inline Dimmer Switch or Inline On/Off Switch, and assorted DC connectors that help give you a maximum of installation options. These are self-contained kits and need no special tools for assembly.
EMBER Mist Resist™ Strip Light is the perfect LED lighting option for indoor areas exposed to occasional splashing or excessive dust and dirt.
FENCER™ Under Cabinet LED Light Fixture Series represents a new generation of under cabinet lighting for kitchens and task lighting. This high quality, ultra bright fixture connects directly to 120V AC electrical currents and is compatible with select wall dimmers
This sleek and low profile on/off switch responds to the slightest change in the infrared light spectrum and turns on the light when you open a closet or cabinet and turns off when the door is closed.
The LightTouch™ LED Dimmer Switch is a compact and dynamic tool for dimming of LED lighting. Featuring a fully touch-sensitive housing, for full dimming control and for turning your lights on and off. The LightTouch™ LED touch dimmer features DC plugs that are standard to all our DC plug accessories.
REIGN 12V/24V Dimmer Switches are manufactured for Diode LED as electronic low voltage dimmers that fit right into a standard wall light switch box. These dimmers are connected between the 12V or 24V DC power supply and 12V or 24V LED fixture, and will dim any of Diode’s LED lights that are dimmable.
The LED Wi-Fi Controller puts the dimming and RGB color control of your LED lights into you mobile device. Touchscreen compatibility with Apple products (Ipod, Ipad, Iphone) and Android (phone and tablets) allows control from anywhere within Wi-Fi range.







