10 Foot SPECTRUM RGB Strip Kit
The 10 Foot SPECTRUM RGB Strip Kit a great way to get everything you need for a color-changing LED light installation, all in one easy-to-configure package. Like single color FLUID VIEW Strips, SPECTRUM RGB Strips are flexible and cuttable, and they come with a 3M adhesive backing tape, so they’re ready for any custom installation.
10 Watt Hard-Wired Non-Dimmable Mini Driver
In order to get top performance from your LED lighting, it is crucial to ensure a steady voltage. Our 10 Watt Hard-Wired Non-Dimmable Mini Driver provides extremely steady voltage along with high efficiency, so you will get the most from your LED lights (or non-LEDs) and see savings on your power bill. This 12V DC mini driver is an energy-efficient, eco-friendly, and safe power source for any Diode fixture. (Click on the photo to the left to see full product information.)
12 Watt Plug-In Adapter
Convert your household’s or business’ AC voltage to 12V DC with our 12 Watt Plug-In Adapter. Using an adapter is the right choice if you are installing just a few light fixtures, or just want to avoid making a permanent installation with a bigger, hardwired power driver. All of Diode’s fixtures run on 12V DC power, and the 12W Plug-In Adapter is perfect for small, portable LED light installations. (Click on the photo to the left to see full product information.)
120 Watt Plug-In Adapter
Our 120 Watt Plug-In Adapter converts your business’ or household’s AC voltage to the 12 Volt DC used by Diode’s fixtures. Converting your voltage with a DC Adapter is easy: just plug your LED lights into the DC plug of our 120 Watt adapter either directly or using one of our simple connectors. Using an adapter is the right choice if you want to avoid making a permanent installation with a bigger, hard-wired driver, or if you are lighting in a display or presentation, or cabinets and other furniture that aren’t permanently positioned. (Click on the photo to the left to see full product information.)
18/2 Wire
18/2 Wire is a heavy-duty 18 Gauge, 2-strand wire that is compatible with all of Diode's LED lighting products. It is used primarily as a way of extending the reach of our LED strip lighting, puck lights and downlights, LED light bars, and more. Whether you need to extend the distance between your LED fixture and its power source, or to put two or more light bars or pucks far from each other, or to power multiple but different LED light fixtures from the same source, this 18/2 Wire is the solution. (Click on the photo to the left to see full product information.)
22/4 Wire
22/4 Wire is a 22 Gauge, 4-strand wire that is compatible with Diode's color-changing RGB LED lighting products. 22/4 Wire is used primarily for creating extensions between color-changing SPECTRUM Strip Lights, and between TRUE FOCUS RGB LED Tubes. It's also tailor-made for parallel runs of SPECTRUM Strip Light. This wire can also be used to extend the distance between a color-changing light and the RGB color controller. (Click on the photo to the left to see full product information.)
25 Watt Mini Hard-Wired Non-Dimmable Driver
Our 25 Watt Mini Hard-Wired Non-Dimmable Driver is a compact, low-wattage power supply that is perfect for smaller LED light installations. Diode LED's drivers provide steady 12 Volt current along with high efficiency, so you will get the most from your LED lights and see savings on your power bill. All our drivers are energy-efficient, eco-friendly, and safe, and produce very little heat. (Click on the photo to the left to see full product information.)
36 Watt Plug-In Adapter
Convert your household’s or business’ AC voltage to the 12 Volt DC used by all of Diode’s products with our 36 Watt Plug-In Adapter. Converting your voltage with a DC Adapter is easy: just plug your LED lights into the ¼ inch jack of our 36 Watt adapter either directly or using one of our simple connectors. Using an adapter is the right choice if you are installing just a few light fixtures, or just want to avoid making a permanent installation with a bigger, hard-wired driver. (Click on the photo to the left to see full product information.)
5 Foot SPECTRUM RGB Strip Kit
The 5 Foot SPECTRUM RGB Strip Light Kit a great way to get everything you need for a color-changing LED light installation, all in one easy-to-configure package. Like single color FLUID VIEW Strips, SPECTRUM RGB Strips are flexible and cuttable, and they come with a 3M adhesive backing tape, so they’re ready for any custom installation.
60 Watt Plug-In Adapter
Our 60 Watt Plug-In Adapter converts your business’ or household’s AC voltage to the 12 Volt DC used by Diode’s fixtures. Converting your voltage with a DC Adapter is easy: just plug your LED lights into the DC plug of our 60 Watt adapter either directly or using one of our simple connectors. Using an adapter is the right choice if you want to avoid making a permanent installation with a bigger, hard-wired driver, or if you are lighting in a display or presentation, or cabinets and other furniture that aren’t permanently positioned. (Click on the photo to the left to see full product information.)
96 Watt Plug-In Adapter
Our 96 Watt Plug-In Adapter converts your business’ or household’s AC voltage to the 12 Volt DC used by Diode’s fixtures. Converting your voltage with a DC Adapter is easy: just plug your LED lights into the DC plug of our 96 Watt adapter either directly or using one of our simple connectors. Using an adapter is the right choice if you want to avoid making a permanent installation with a bigger, hard-wired driver, or if you are lighting in a display or presentation, or cabinets and other furniture that aren’t permanently positioned. (Click on the photo to the left to see full product information.)
AC Power Cable
We offer this grounded AC Power Cable primarily as a way of expanding our Dimmable Hard-Wired Drivers, but it's also useful for connecting any of our drivers to a standard high voltage wall outlet. This cable gives any of our low voltage hard-wired drivers the flexibility of a plug-in adapter, with the added safety feature of a ground. (Click on the photo to the left to see full product information.)
ARRAY Linkable Light Bar
The ARRAY Linkable Light Bar features a patented modular design that allows you to create a seamless LED light installation. With the use of the included ARRAY Bar-to-Bar Connector (DI-0266), any two ARRAY bars of any length can be directly joined end-to-end. This means there are no gaps in the light put out by these sleek and compact bars. As many as twelve 11.8 inch bars can be joined and powered by one 12V source. (Click on the photo to the left to see full product information.)
BLAZE 16 Foot Strip Light Kit
The BLAZE 16 Foot Strip Light Kit is a simple, all-inclusive package that enables you to set up an LED light installation in minutes. This kit features BLAZE High Output Strip--twice as bright as FLUID VIEW Strip--and comes ready for installation with these components: one 16.4 foot spool of BLAZE High Output Strip Light, available in warm white or cool white; one female DC Wire Plug; one Inline Dimmer Switch; one 1 Meter DC Extension Cable; and one 60 Watt Plug-In Adapter.
BLAZE High Output Strip Light
BLAZE High Output Strip Light has twice as many LED bulbs as the FLUID VIEW Strip Light, so it offers twice the brightness. It has the same ultra-low profile as the FLUID VIEW strips, which means it will fit in almost any lighting installation. This light is only one third of an inch wide and one tenth of an inch high, and comes with a 3M adhesive backing that ensures easy mounting virtually anywhere. The BLAZE Strip is cuttable every inch. (Click on the photo to the left to see full product information.)
CASCADE Light Bar
The CASCADE Light Bar is twice as bright as the SUNRISE Light Bar, using high-power tri-chip SMD bulbs. It’s dimmable, waterproof (but not submersible), and wet location rated (IP68). With its compact size, this super bright fixture makes a great alternative to the fluorescent tube. This light bar requires a low amount of electricity to power it, only 3.6 - 7.2 Watts per bar, and gives off very little heat, making it perfect to light heat-sensitive items such as plants, food, wine, art, etc. (Click on the photo to the left to see full product information.)
CAST Brushed Aluminum Downlight
The CAST Brushed Aluminum Downlight is a great fixture for replacing hot halogen and flickering fluorescent lights in all indoor recessed cabinet, ceiling, furniture, display-case, and accent lighting applications. With a minimalist design and eco-friendly technology, this easy-to-install fixture produces up to 400 lumens of light output while consuming only 7.2 Watts of electricity. (Click on the photo to the left to see full product information.)
CAST Brushed Aluminum Puck Light
An excellent substitute for hot halogen and unsightly fluorescent lighting, our CAST Brushed Aluminum Puck Light is a slim, modern, and earth-friendly indoor light fixture. CAST Pucks are available in two versions: dimmable and non-dimmable. This puck light is perfect for all recessed cabinet and under cabinet lighting, as well as furniture, shelf, display-case, and accent lighting. Producing 270 lumens of light output while consuming a mere 3.6 Watts of electricity, this LED Puck is your brightest option available. That’s only 10% of the power used by a halogen or other incandescent fixture of equal brightness. (Click on the photo to the left to see full product information.)
DAZZLE High Output RGB Strip Light
The DAZZLE High Output RGB Strip Light offers all the same features and advantages as our standard SPECTRUM LED Strip Light, but has twice as many luminaires and is twice as bright. This strip light transforms a living room, rec room or home entertainment center into a place for parties and special events. It's also useful for lighting large display cases, shop windows, restaurants and bars. With the use of one of Diode's RGB color controllers, this super bright RGB strip makes for an easy, economical LED light solution.
DC Splitter Cables
The DC Splitter Cable allows you to connect anywhere from two to five LED light fixtures to a single power source. The DC Splitter Cable is a convenient accessory for connecting our CAST Puck Lights and REFRACT Light Bars to one power source, whether through our Inline Dimmer Switch or Inline On/Off Switch, which both feature 1/4 inch DC plugs. Using these 12V splitter cables with a plug-in adapter couldn’t be easier, as they plug directly into the adapters. Our DC Splitter Cables are available in three sizes: 2-Way, 3-Way, and 5-Way.
Dimmable CAST Brushed Aluminum 3 Puck Light Kit
The Dimmable CAST Brushed Aluminum 3 Puck Light Kit is a quick and easy way to get everything you need for an LED lighting installation. Each plug-and-play kit includes 3 CAST Brushed Aluminum Puck Lights with mounting screws, a Plug-In Adapter, an Inline Dimmer Switch, a 1 Meter DC Extension Cable, and a 3-Way DC Splitter Cable. This is a self-contained, ready-to-install kit and needs no special tools for assembly.
Dimmable CAST Brushed Aluminum 5 Puck Light Kit
The Dimmable CAST Brushed Aluminum 5 Puck Light Kit is a quick and easy way to get everything you need for an LED lighting installation. Each plug-and-play kit includes 5 CAST Brushed Aluminum Puck Lights with mounting screws, a Plug-In Adapter, an Inline Dimmer Switch, a 5-Way DC Splitter Cable, plus two 1 Meter DC Extension Cables. This is a self-contained, ready-to-install kit and needs no special tools for assembly.
FLUID VIEW 16 Foot Strip Light Kit
The FLUID VIEW 16 Foot Strip Light Kit is a simple, all-inclusive package that enables you to set up an LED light installation in minutes. This kit comes ready for installation with these components: one 16.4 foot spool of FLUID VIEW Strip Light, available in warm white or cool white; one female DC Wire Plug; one Inline On/Off Switch; and one 36 Watt Plug-In Adapter.
FLUID VIEW and BLAZE High Output Strip Light T Sections
FLUID VIEW and BLAZE High Output Strip Light T Sections are the perfect accessory for an LED light installation where two LED strip light sections running at right angles to each other need to be joined. These T sections ensure a continuous, seamless, and uninterrupted LED light strip installation, and allow multiple strip sections to be powered by the same source. Whether for cove lighting, on overhead beams, or in display cases, low profile LED Strip Light T Sections can be used in many discreet locations. Available in a FLUID VIEW version, or in a BLAZE High Output version that's twice as bright. (Click on the photo to the left to see full product information.)
FLUID VIEW and BLAZE Strip Light L Sections
FLUID VIEW and BLAZE High Output Strip Light L Sections are the perfect accessory to complete an LED light installation where you need continuous light around a corner. Whether inside a cabinet, or in shelving, or for cove lighting, low profile LED strip light can be used in many discreet locations. Available in a FLUID VIEW version, or in a BLAZE High Output version that's twice as bright. (Click on the photo to the left to see full product information.)
FLUID VIEW Strip Light
The FLUID VIEW Strip Light is a light fixture that has it all. It’s cuttable to a custom length and dimmable. It’s extremely low-profile, at a tenth of an inch high and third of an inch wide, so it can be used virtually anywhere. It’s a 12V fixture that draws less than 1.5 Watts per foot, so it’s very economical. To top it off, it comes in a rainbow of colors: warm white, cool white, amber, pink, red, green, blue, and purple. (Click on the photo to the left to see full product information.)
FLUID VIEW Waterproof Strip Light
FLUID VIEW Waterproof Strip Light is commercial-grade strip designed for outdoor and indoor home and business use and is waterproof (but not submersible) with a wet location rating of IP68. Drawing only 1.44 watts of power per foot, these dimmable strips are extremely energy-efficient. This flat strip is only a quarter inch high by a third of an inch wide, so it can be installed virtually anywhere. (Click on the photo to the left to see full product information.)
Hard-Wired Indoor Non-Dimmable Drivers
Our Hard-Wired Indoor Non-Dimmable Driver provides steady 12 Volt current along with high efficiency, so you will get the most from your LED lights and see savings on your power bill. All our 12V LED drivers are energy-efficient, eco-friendly, and safe, and produce very little heat. If you’re working with a permanent home installation, it’s vital to use a Power Driver as it provides an even, stable current. (Click on the photo to the left to see full product information.)
Hard-Wired Indoor/Outdoor Dimmable Drivers
The Hard-Wired Indoor/Outdoor Hard-Wired Dimmable Driver is a steady low voltage power driver perfect for dimming LED lights without flickering. This transformer can power any of our dimmable LED lights while using an existing household dimmer. There's no need to rewire your kitchen cabinets or living room lights, just tap into the high voltage AC power near where you intend to install your energy-efficient LED product. And this driver has no minimum load requirement. (Click on the photo to the left to see full product information.)
Hard-Wired Indoor/Outdoor Non-Dimmable Drivers
Our Hard-Wired Indoor/Outdoor Non-Dimmable Driver provides steady 12 Volt current along with high efficiency, so you will get the most from your LED lights and see savings on your power bill. All our 12V LED drivers are energy-efficient, eco-friendly, and safe, and produce very little heat. In addition, this driver has an IP rating of IP67 which means it's wet location rated. (Click on the photo to the left to see full product information.)
High Power RF RGB Color Controller
Our High Power RF RGB Color Controller is a wireless radio frequency micro-control unit used for commanding any of our SPECTRUM RGB lights over longer distances. The High Power RF RGB Color Controller includes a wireless handheld remote control that allows you to change the mode, speed, and brightness of the lights from a distance of up to 150 feet from the controller itself. (Click on the photo to the left to see full product information.)
Inline Dimmer Switch
With this Inline LED Dimmer Switch you can now dim any of our dimmable light fixtures. Simply plug this attractive and easy-to-use dimmer switch into your 12V adapter at one end and your lighting source at the other, whether it's Fluid View Strips, light bars, or LED tubes. Dimming is achieved with a turn of the smooth and sensitive rotary dial, which is housed in sturdy white plastic. (Click on the photo to the left to see full product information.)
Inline Motion Sensor Switch
The Inline Motion Sensor Switch is an automatic movement sensor switch that is activated by any motion within 6 feet. Using infrared detection technology, it is triggered by movement: the infrared detection unit turns on the your low voltage light when someone is in range; when there is no movement, the lamp will turn off automatically after 20 seconds without any motion. This low voltage switch is perfect for indoor or outdoor use, as it is wet location rated.
Inline On/Off Switch
This Inline On/Off Switch is for use in switching our LED products on and off between the power source and the fixture. Sleek and discreet, with rounded edges and a clean white color, the Inline Switch is attractive enough to be used in the open and compact enough to be tucked away out of sight. (Click on the photo to the left to see full product information.)
K-Range Dual Slide Switch
With the K-Range Dual Slide Switch you can choose the exact shade of white light for the K-Range Tunable Strip Light (DI-1101), as well as dim your lights from 100% to 5%. This strip light enables you to set up dimmable, color-temperature-controlled white LED lights. (Click on the photo to the left to see full product information.)
K-Range Tunable Strip Light
K-Range Tunable Strip Light gives you total control over the white color temperature of your LED lighting. With the K-Range Dual Slide Switch (DI-1100) you can choose the exact shade of white light for your LED lighting, as well as dim your lights from 100% to 5%. This strip light enables you to set up dimmable, color-temperature-controlled white LED lights. (Click on the photo to the left to see full product information.)
KLUS Strip Light Channel Diffuser
The KLUS Strip Light Channel Diffuser works with KLUS Strip Light Channels to provide protection for Diode's non-waterproof strip lights. The Frosted KLUS Strip Light Channel Diffuser softens the illumination from the strip light, while the Clear KLUS Channel Diffuser shields the strip light from dust, but doesn’t diffuse the light. The KLUS Channel Diffuser is easy to install: just slide it into the existing slot in the KLUS Strip Light Channel. (Click on the photo to the left to see full product information.)
KLUS Strip Light Channels
KLUS Strip Light Channels protect and provide light diffusion for FLUID VIEW, BLAZE, and SPECTRUM RGB Strip Lights. The sturdy but lightweight matte anodized aluminum KLUS Channels are available in three versions: the QUAD is a square-shaped channel that mounts flush on a surface; the ORB has a rounded shape that lets you adjust the angle of the channel; and the NOOK has a right-angled shape that allows for mounting in a corner so that light shines at a 45° angle. (Click on the photo to the left to see full product information.)
Meanwell Junction Box
The Meanwell Junction Box provides a protective housing for several Diode LED 12V Hard-Wired Non-Dimmable Drivers. This junction box is compatible with the 200W Hard-Wired Non-Dimmable Driver (DI-0909), 300W Hard-Wired Non-Dimmable Driver (DI-0928), and 600W Hard-Wired Non-Dimmable Driver (DI-0929). This NEMA 1 steel power supply enclosure is intended for indoor use and features ventilation holes, four 1/2 inch knockouts, and built-in mounting tabs. This junction box is ETL Listed.
PortaVolt Rechargeable Battery Pack
The PortaVolt Rechargeable Battery Pack is a lithium-ion battery designed specifically to integrate with our light bars, strip Lights, and any 12V DC LED light. The PortaVolt Battery Pack can be recharged without limitations, as the battery charging process is designed for a slow charge process, which helps the battery pack last longer. This battery comes with an extension cable featuring DC plugs that connect directly to any Diode fixture or accessory that has a DC plug. (Click on the photo to the left to see full product information.)
REIGN 12V Dimmer Switches
REIGN 12V Dimmer Switches are manufactured for Diode as electronic low voltage dimmers that fit right into a standard wall light switch box. These 12V DC dimmers are connected between the 12V power supply and 12V LED fixture, and will dim any of Diode’s LED lights that are dimmable. (Click on the photo to the left to see full product information.)
SPECTRUM Flexible Strip Extension Cable
The SPECTRUM Flexible Strip Extension Cable is a great accessory for a large full color LED installation. Whether you need to have two areas of a large room accented with full color LED light, but want them on the same color controller, or you want to set up parallel runs of FLUID VIEW SPECTRUM RGB strip light, this 16.5 foot (5 meter) extension cable allows you create space between TRUE FOCUS SPECTRUM RGB Tube Light or sections of FLUID VIEW SPECTRUM RGB strip light.
SPECTRUM Flexible Strip EZ Connector with exposed lead wires
The SPECTRUM Flexible Strip EZ Connector with exposed lead wires connects FLUID VIEW RGB Strip Light to any of Diode’s RGB color controllers. The EZ Connector saves time and effort by eliminating the need to solder, and is easy to connect.
SPECTRUM Flexible Strip to Bar EZ Connector
The SPECTRUM Flexible Strip to Bar EZ Connector connects a TRUE FOCUS SPECTRUM RGB Tube Light to a section of FLUID VIEW SPECTRUM RGB Strip Light in two easy steps. The connector features one standard FLUID VIEW RGB Strip Light plug that works the same way as a standard FLUID VIEW connector; and it has either a male or a female version of the SPECTRUM RGB Light Bar plug, which pops right into the plug that is hardwired on the TRUE FOCUS RGB Tube Light.
SPECTRUM Mini RGB Strip Amplifier
The Spectrum Mini RGB Strip Amplifier is an essential accessory for medium to large color-changing LED Strip Light installations. An RGB color controller can command up to 16 feet of RGB strip lights in one continuous run. But if you want to run more than 16.5 feet of strip lights on one RGB signal, you will need an RGB Signal Amplifier, and the Mini Amplifier is our most compact one yet. About the size of a matchbox, this small accessory can help you furnish an entire restaurant, club, bar, or event space with color-changing LED lighting. And it's wet location rated, so it can be used for outdoor LED lighting. (Click on the photo to the left to see full product information.)
SPECTRUM RGB Color Controller
The SPECTRUM RGB Color Controller is a universal RGB LED control unit that can change the color of any RGB LED lighting fixture. It can work with our FLUID VIEW RGB Strip Lights, the TRUE FOCUS RGB Tube Light, or any full color fixture that uses 4 channels and has a common positive (common anode). With the Spectrum Controller there are eleven RGB changing modes available and the speed of each mode can be adjusted wirelessly in increments of 1-100 with the remote control included with the unit. (Click on the photo to the left to see full product information.)
Spectrum RGB Strip Amplifier
If you run a restaurant, club, bar, art gallery or any number of other venues, and would like to achieve elegant décor through lighting, you may need our Spectrum RGB Strip Amplifier. The Spectrum RGB Color Controller can command up to 16 feet of Spectrum strip lights. But if you want to run more than 16 feet of strip lights on one continuous RGB signal, you will need a Spectrum Strip amplifier. (Click on the photo to the left to see full product information.)
SPECTRUM Strip Lights
Diode’s SPECTRUM Strip Lights are designed to establish ambiance add color to interiors with eco-friendly, full-color LED lighting. SPECTRUM RGB Light Strips can be used creatively in a home or a business and are well suited for lighting spaces that require a low-profile, low-heat light source that has full color capabilities. Because they can be cut, Spectrum strips fit well into installations, displays, tight spaces, and are perfect for use in shelves, soffitts, cabinets, and display cases. (Click on the photo to the left to see full product information.)
SPECTRUM Waterproof RGB Signal Amplifier
The SPECTRUM Waterproof RGB Signal Amplifier allows you to power and color-control sections of FLUID VIEW Waterproof RGB Strip greater than 16 ft. by amplifying the controller signal and the power. One Signal Amplifier is necessary for every 16 feet of SPECTRUM strip.
SPECTRUM Waterproof Strip Lights
Our SPECTRUM Waterproof Strip Lights offer a unique, attractive solution for your energy-efficient, full-color LED lighting requirements. This RGB strip is optimal both for indoor and outdoor uses, including kitchen cabinet and bathroom lighting, garden lights, tank and aquarium lighting, deck and patio lighting, as special event and party lights, and under cabinet lighting, as well as decorative and accent lighting, small-floodlight use and cove lighting. (Click on the photo to the left to see full product information.)
SUNRISE Light Bar
The SUNRISE Light Bar is a sleek, waterproof (but not submersible), and dimmable fixture that requires very little power. The SUNRISE Light Bar is a low-profile LED bar that’s a mere half inch wide and quarter inch high. This bar will light shelves, cabinets, and other tight spaces that a standard bulb cannot. The SUNRISE light bar is wet location rated (IP68), so it can be used almost anywhere, indoors or out. (Click on the photo to the left to see full product information.)
SUNSPOT Module Light
The SUNSPOT Module Light is a plug-and-play, compact LED light fixture that is sold by the module, allowing you to install as many lights virtually anywhere you need to. This light module features a DC plug that connects directly to a 12V Plug-In Adapter, and it can be modified to connect to a 12V Hard-Wired Driver using the 12V Adapter Splice Cable. This IP68-rated module is perfect for use in wet locations such as decks and railings, in displays and exhibits, and for small spotlighting. This module light is available as a spot light or a flood light. (Click on the photo to the left to see full product information.)
TRUE FOCUS LED Tube Light
The TRUE FOCUS LED Tube Light is one of our most efficient fixtures, with an energy usage of just 1.44 to 3.6 Watts per tube. The dimmable TRUE FOCUS LED Tube’s compact size fits into almost any space, while offering maximum adjustability: the included mounting clips allow you to position the bar at just the angle you need, for back wash or uplighting. This under cabinet light bar makes an excellent replacement light fixture to the fluorescent tube. Being green has never been this simple! (Click on the photo to the left to see full product information.)
VoltaMax High Output Rechargeable Battery Pack
The VoltaMax High Output Rechargeable Battery Pack is a lithium-ion battery designed specifically to power our LED light bars, Flexible LED Strip Lights, or any 12V LED light. This battery has over three times the capacity of Diode's PortaVolt battery, and will power one of our 20" TRUE FOCUS LED Tube Lights for a full 52 hours. This battery comes with an extension cable featuring DC plugs that connect directly to any Diode fixture or accessory that has a DC plug.
Wall Mount RGB Color Controller
The Wall Mount RGB Color Controller is an advanced wireless micro-control unit used for controlling any color-changing FLUID VIEW SPECTRUM RGB strip lights or TRUE FOCUS SPECTRUM RGB Tube Lights. This package features the color controller, a lightweight wall-mounted wireless remote control, and a wireless handheld remote control, all of which allow you to change the mode, speed, and brightness of your full color LED lighting, whether RGB strip lights or light bars. (Click on the photo to the left to see full product information.)
Waterproof Male to Female Extension Cables
Waterproof Male to Female Extension Cables are the optimal accessory for getting the most out of an LED Light Bar or waterproof LED strip light installation. They're compatible with and connect directly to SUNRISE and CASCADE Light Bars, the TRUE FOCUS Tube Light, and single-color FLUID VIEW Waterproof Strip Light.
