Diode LED is a brand of Elemental LED

Shopping List Contact Us

Connectors, Wire, and Accessories

Brazzaville House (Republic of Congo)
Ean Carr

Connectors, wires, and other accessories to round out your projects.

Diode LED holds patents on some of the leading connectors in the industry and supports installation accessories for all environments.

8mm Terminal Blocks

Screw-down connector for easy, secure connections with LED tape light. Fits inside channels for a clean, professional installation.

12mm Terminal Blocks

Create easy, fast, and secure tape light connections with the 12mm Tape Light Terminal Block Connector.

Shop By
Open All | Close All

Currently Shopping by:

  1. Remove This Item Environment / IP Rating: Dry location
Clear All

Filter

Output Voltage
  1. 12-24V DC (1)

Connectors, Wire, and Accessories

Connectors, wires, and other accessories to round out your projects.

23 Item(s)

Set Ascending Direction
  1. XLR-3 to RJ45 Adapter Cable Pair - male

    XLR-3 to RJ45 Adapter Cable Pair

    Converts RJ45 port of 4-Channel DMX Decoder to a standard XLR-3 connection.
  2. RJ45 Splice Cable

    RJ45 Splice Cable

    Lead wires connect to wall-mount DMX controllers while RJ45 plug connects to DMX accessories.
  3. DMX Wireless Transmitter/Receiver

    DMX Wireless Transmitter/Receiver

    The DMX Wireless Receiver/Transmitter will wirelessly send DMX signals between controllers and fixtures via XLR-3 connections.
  4. RJ45 Extension Cable

    RJ45 Extension Cable

    Creates a 10 ft. extension between DMX fixtures and accessories utilizing RJ45 connections.
  5. RJ45 Coupler

    RJ45 Coupler

    Female-to-female accessory quickly connects two RJ45 accessories.
  6. 20 ft. DMX XLR-3 Extension Cable

    20 ft. DMX XLR-3 Extension Cable

    Creates an extension between DMX fixtures and accessories. Features XLR-3 connections.
  7. EQUIFLUX® LED Display Graphics Lighting Connectors

    EQUIFLUX® LED Display Graphics Lighting Connectors

    Extension cables and plug-in power connectors available.
  8. XLR-3 to RJ45 Adapter Connector Pair (RJ45 connection shown)

    XLR-3 to RJ45 Adapter Connector Pair

    Converts RJ45 data cables to XLR-3 DMX connections. Sold by the pair (male/female).
  9. RGB Light Bar Splice Pair

    RGB Light Bar Splice Pair

    The RGB LED Light Bar Splice Cable is designed to make an easy connection between our TRUE FOCUS RGB LED Light Bars and an RGB color controller.
  10. SPOTMOD® LINK Accessories

    SPOTMOD® LINK Accessories

    Choose any of the SPOTMOD® LINK accessories here to complete your installation.
  11. Occupancy Sensor Switch

    Occupancy Sensor Switch

    Detects motion within view of sensor at approximately 9.5 feet On/off functionality only.
  12. FENCER® Series LED Lighting Fixture Accessories

    FENCER® Series LED Lighting Fixture Accessories

    Accessories for use with SABER and FOIL Under Cabinet Fixture models.
  13. Proximity Sensor

    Proximity Sensor Switch

    Perfect for cabinets and drawers, the switch is off when the sensor is obstructed or blocked. It then turns on when the sensor is uncovered.
  14. CLICKTIGHT® Tape Light Connectors

    CLICKTIGHT® Tape Light Connectors

    CLICKTIGHT Connectors are an easy way to install your standard single color LED tape light out in the field.
  15. SPOTMOD® TILE Accessories

    SPOTMOD® TILE Accessories

    Choose any of the SPOTMOD® Tile accessories here to complete your installation.
  16. Passive Sensor

    Passive Sensor Switch

    Wave hand in front of sensor (within ≤ 2.3 inches) to activate lighting; wave again to deactivate lighting.
  17. Meanwell™ Junction Box

    MEAN WELL™ Junction Box

    The Meanwell Junction Box has a silver finish with 1/2″ NPT knockouts and features easy access cover panel. Intended for contractor installations and is a NEMA 1 steel enclosure.

  18. DC Splitter Plugs

    DC Splitter Plugs

    Helps connect two to five LED light sources to a single power source.
  19. 4-Way Hard Wire Terminal Block

    4-Way Hard Wire Terminal Block

    4-Way Terminal Blocks are a convenient accessory for joining up to three LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  20. 8-Way Hard-Wire Splitter

    8-Way Hard-Wire Splitter

    8-Way Hard-Wire Splitters are a convenient accessory for joining up to seven LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  21. TAPEGUARD® LED Tape Light Cover

    TAPEGUARD® LED Tape Light Cover

    An easy way to provide protection and diffusion for indoor LED lighting, and create an attractive and finished look.

  22. In-Wall Rated Two Conductor Wire

    In-Wall Rated Two Conductor Wire

    UL Listed wire rated for in-wall installations.
  23. Adapter Splice Cable - Female

    Adapter Splice Cable

    Helps provide a hard-wire connection between LED lighting and a DC adapter.

23 Item(s)

Set Ascending Direction

  • Resources

  • Find IES files, LM79 reports, Specification Sheets, Install Guides, Voltage Drop Charts, compatibility lists and more.

  • About Us

  • America's largest provider of low-voltage linear lighting solutions preferred by lighting designers, architects, product specifiers, electricians, and general contractors.

© 2024 Elemental LED, Inc.
Post your comment

Diode LED