LED Lighting Accessories

Complete LED Solutions

Connectors, Wire, and Accessories

Here you'll find the final components to complete your LED lighting system.

1-25 of 32

Page
  1. 1
  2. 2
Set Ascending Direction
  1. DOUBLE BLAZE™ LED Tape Light Connectors
    Use to join sections of DOUBLE BLAZE 12V LED Tape Light to each other or connect to power.
  2. CLICKTIGHT® Connectors

    CLEARANCE PRODUCT


    CLICKTIGHT® connectors perform as simple, secure, indoor/dry location connections for LED tape light.

  3. CLEARANCE: K-RANGE® CLICKTIGHT® Tape Light Connector
    CLEARANCE PRODUCT
    While supplies last!
    K-RANGE® connectors are design specifically for use with K-RANGE 24V Tunable White LED Tape Light and K-RANGE color controllers.
  4. SQUARE-PRO Junction Box
    CLEARANCE PRODUCT
    While supplies last!
    For in-wall installations of select DMX, wall mounted controllers.
  5. XLR-3 to RJ45 Adapter Cable Pair - male
    Converts RJ45 port of 4-Channel DMX Decoder to a standard XLR-3 connection.
  6. DMX Wireless Transmitter/Receiver
    The DMX Wireless Receiver/Transmitter will wirelessly send DMX signals between controllers and fixtures via XLR-3 connections.
  7. RJ45 Coupler
    Female-to-female accessory quickly connects two RJ45 accessories.
  8. RJ45 Splice Cable
    Lead wires connect to wall-mount DMX controllers while RJ45 plug connects to DMX accessories.
  9. DMX 8-Way Splitter
    Amplifies and splits DMX signals to accommodate up to 80 DMX wall washers per splitter.
  10. RJ45 Extension Cable
    Creates a 10 ft. extension between DMX fixtures and accessories utilizing RJ45 connections.
  11. XLR-3 to RJ45 Adapter Connector Pair (RJ45 connection shown)
    Converts RJ45 data cables to XLR-3 DMX connections. Sold by the pair (male/female).
  12. 20 ft. DMX XLR-3 Extension Cable
    Creates an extension between DMX fixtures and accessories. Features XLR-3 connections.
  13. DMX Decoder with Built-in LED Driver
    The new DMX Driver combines the operations of a low voltage 24V Class 2 LED Power Supply and a DMX Decoder into a single unit.
  14. EQUIFLUX® LED Display Graphics Lighting Connectors
    Extension cables and plug-in power connectors available.
  15. Meanwell™ Junction Box

    The Meanwell Junction Box has a silver finish with 1/2″ NPT knockouts and features easy access cover panel. Intended for contractor installations and is a NEMA 1 steel enclosure.

  16. FENCER® Series LED Lighting Fixture Accessories
    Accessories for use with SABER and FOIL Under Cabinet Fixture models.
  17. SPOTMOD® TILE Accessories
    Choose any of the SPOTMOD® Tile accessories here to complete your installation.
  18. SPOTMOD® LINK Accessories
    Choose any of the SPOTMOD® LINK accessories here to complete your installation.
  19. FENCER SABER Occupancy Sensor

    Save energy usage with your FENCER Series SABER™ Under Cabinet Fixtures with this advanced occupancy sensor from Diode LED.


    SPECIAL ORDER ITEM ONLY.


     

  20. Proximity Sensor
    Perfect for cabinets and drawers, the switch is off when the sensor is obstructed or blocked. It then turns on when the sensor is uncovered.
  21. Occupancy Sensor Switch
    Detects motion within view of sensor at approximately 9.5 feet On/off functionality only.
  22. Passive Sensor
    Wave hand in front of sensor (within ≤ 2.3 inches) to activate lighting; wave again to deactivate lighting.
  23. RGB Light Bar Splice Pair
    The RGB LED Light Bar Splice Cable is designed to make an easy connection between our TRUE FOCUS RGB LED Light Bars and an RGB color controller.
  24. 8-Way Hard-Wire Splitter
    8-Way Hard-Wire Splitters are a convenient accessory for joining up to seven LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  25. DC Plug Extension Cable
    Connects directly to DC plug accessories, plug-in adapters, and the TRIANT® LED Puck Light.

1-25 of 32

Page
  1. 1
  2. 2
Set Ascending Direction
Post your comment

Diode LED