Diode LED is a brand of Elemental LED

Shopping List Contact Us

Connectors, Wire, and Accessories

Brazzaville House (Republic of Congo)
Ean Carr

Connectors, wires, and other accessories to round out your projects.

Diode LED holds patents on some of the leading connectors in the industry and supports installation accessories for all environments.

8mm Terminal Blocks

Screw-down connector for easy, secure connections with LED tape light. Fits inside channels for a clean, professional installation.

12mm Terminal Blocks

Create easy, fast, and secure tape light connections with the 12mm Tape Light Terminal Block Connector.

Shop By
Open All | Close All

Filter

Remote Control Type
  1. n/a (1)
Class 2
  1. YES (1)

Connectors, Wire, and Accessories

Connectors, wires, and other accessories to round out your projects.

1-25 of 63

Page
  1. 1
  2. 2
  3. 3
Set Ascending Direction
  1. XLR-3 to RJ45 Adapter Connector Pair (RJ45 connection shown)

    XLR-3 to RJ45 Adapter Connector Pair

    Converts RJ45 data cables to XLR-3 DMX connections. Sold by the pair (male/female).
  2. XLR-3 to RJ45 Adapter Cable Pair - male

    XLR-3 to RJ45 Adapter Cable Pair

    Converts RJ45 port of 4-Channel DMX Decoder to a standard XLR-3 connection.
  3. Wire Management - Clips and Fasteners

    Wire Management – Clips and Fasteners

    Wire management accessories help keep wiring and LED tape lights organized and secure.
  4. Wet Location Tape Light Sealing Accessories

    Wet Location Tape Light Sealing Accessories

    The Wet Location LED Strip Light Sealing Accessories are everything needed to re-seal Wet Location Strip Light.
  5. Wet Location Splice Connector Pair (10.5mm)

    Wet Location Splice Connector Pair

    The Wet Location Splice Connector Pairs are an essential accessory for connecting a wet location LED lighting to a hard-wire connection.
  6. Wet Location RGB Splice Connector Pair

    Wet Location RGB Splice Connector Pair

    The Waterproof RGB Solder Connector helps you adapt your waterproof RGB plugs to a bare wire connection for connection to an RGB color controller. Sold by the pair, these male and female plugs feature the same 4-pin plug that is hardwired on our DAZZLE 24™ Wet Location RGB Strip Light.
  7. Wet Location Plug to DC Adapter Connector - 10.5mm

    Wet Location Plug to DC Adapter Connector

    Connects a wet location LED strip light with a DC adapter without splicing and soldering.
  8. Wet Location Male to Female Extension Cables - 10.5mm

    Wet Location Male to Female Extension Cables

    These extensions are available in many sizes and compatible with many of Diode LED's wet location products.
  9. Wet Location LED Splitter Plug (10.5mm Plug)

    Wet Location LED Splitter Plug

    The Wet Location Splice Connector Pairs allows you to connect two, three, or five non-linear LED light fixtures to a single power source.
  10. Valent X Connector

    VALENT® X Tape Light Splice connector - 24 in.

    Connects seamlessly with VALENT X 24V LED Tape Light.
  11. TRU-LINK™ Light Bar Accessories

    TRU-LINK® Light Bar Accessories

    Accessories compatible with TRU-LINK® 24V LED Light Bars.
  12. TAPEGUARD® LED Tape Light Cover

    TAPEGUARD® LED Tape Light Cover

    An easy way to provide protection and diffusion for indoor LED lighting, and create an attractive and finished look.

  13. SWITCHEX Trim Plates

    SWITCHEX® Accessories

    SWITCHEX® mounting accessories are the finishing touch for your SWITCHEX Driver and Dimmer Switch.
  14. STREAMLITE™ COB Connectors

    STREAMLITE™ Connectors

    Connectors for STREAMLITE™ Diffused Linear Light.

  15. SPOTMOD® TILE Accessories

    SPOTMOD® TILE Accessories

    Choose any of the SPOTMOD® Tile accessories here to complete your installation.
  16. SPOTMOD® LINK Accessories

    SPOTMOD® LINK Accessories

    Choose any of the SPOTMOD® LINK accessories here to complete your installation.
  17. SABER ACCESSORIES

    SABER™ LED Under Cabinet Light Accessories

    SABER Accessories for easy-to-install 120V fixtures for under cabinet and task lighting. Field switchable between five built-in CCT options. Fixture Page |
  18. RJ45 Splice Cable

    RJ45 Splice Cable

    Lead wires connect to wall-mount DMX controllers while RJ45 plug connects to DMX accessories.
  19. RJ45 Extension Cable

    RJ45 Extension Cable

    Creates a 10 ft. extension between DMX fixtures and accessories utilizing RJ45 connections.
  20. RJ45 Coupler

    RJ45 Coupler

    Female-to-female accessory quickly connects two RJ45 accessories.
  21. RGB Light Bar Splice Pair

    RGB Light Bar Splice Pair

    The RGB LED Light Bar Splice Cable is designed to make an easy connection between our TRUE FOCUS RGB LED Light Bars and an RGB color controller.
  22. RGB LED Splitter Cable

    RGB LED Splitter Cable

    Connect two, three, or five color-changing LED light fixtures to a single power source.
  23. Proximity Sensor

    Proximity Sensor Switch

    Perfect for cabinets and drawers, the switch is off when the sensor is obstructed or blocked. It then turns on when the sensor is uncovered.
  24. PowerTRAX

    PowerTRAX™ Rail System

    PowerTRAX™ is a modular power distribution system for low voltage lighting in unique applications like task, retail, or display lighting.
  25. PLENUM Wire

    Plenum and In-wall wire - two conductor 20AWG

    Plenum and In-wall wire is a robust wire for use in dry, wet, or buried applications. Resistant to oil, gas, UV, and acid.

1-25 of 63

Page
  1. 1
  2. 2
  3. 3
Set Ascending Direction

  • Resources

  • Find IES files, LM79 reports, Specification Sheets, Install Guides, Voltage Drop Charts, compatibility lists and more.

  • About Us

  • America's largest provider of low-voltage linear lighting solutions preferred by lighting designers, architects, product specifiers, electricians, and general contractors.

© 2024 Elemental LED, Inc.
Post your comment

Diode LED