LED Lighting Accessories

Complete LED Solutions

Connectors, Wire, and Accessories

Here you'll find the final components to complete your LED lighting system.

1-25 of 67

Page
  1. 1
  2. 2
  3. 3
Set Ascending Direction
  1. DOUBLE BLAZE™ LED Tape Light Connectors
    Use to join sections of DOUBLE BLAZE 12V LED Tape Light to each other or connect to power.
  2. CLICKTIGHT® Connectors

    CLEARANCE PRODUCT


    CLICKTIGHT® connectors perform as simple, secure, indoor/dry location connections for LED tape light.

  3. CLEARANCE: K-RANGE® CLICKTIGHT® Tape Light Connector
    CLEARANCE PRODUCT
    While supplies last!
    K-RANGE® connectors are design specifically for use with K-RANGE 24V Tunable White LED Tape Light and K-RANGE color controllers.
  4. SQUARE-PRO Junction Box
    CLEARANCE PRODUCT
    While supplies last!
    For in-wall installations of select DMX, wall mounted controllers.
  5. DMX Wireless Transmitter/Receiver
    The DMX Wireless Receiver/Transmitter will wirelessly send DMX signals between controllers and fixtures via XLR-3 connections.
  6. DMX 8-Way Splitter
    Amplifies and splits DMX signals to accommodate up to 80 DMX wall washers per splitter.
  7. DMX XLR-3-Pin Connector Pair
    These connectors let you create custom length cables for any DMX installation.
  8. RJ45 Coupler
    Female-to-female accessory quickly connects two RJ45 accessories.
  9. RJ45 Splice Cable
    Lead wires connect to wall-mount DMX controllers while RJ45 plug connects to DMX accessories.
  10. XLR-3 to RJ45 Adapter Connector Pair (RJ45 connection shown)
    Converts RJ45 data cables to XLR-3 DMX connections. Sold by the pair (male/female).
  11. XLR-3 to RJ45 Adapter Cable Pair - male
    Converts RJ45 port of 4-Channel DMX Decoder to a standard XLR-3 connection.
  12. RJ45 Extension Cable
    Creates a 10 ft. extension between DMX fixtures and accessories utilizing RJ45 connections.
  13. 20 ft. DMX XLR-3 Extension Cable
    Creates an extension between DMX fixtures and accessories. Features XLR-3 connections.
  14. DMX Decoder with Built-in LED Driver
    Driver with integrated DMX controller for integrating static color and color-changing tape light into DMX systems with the fewest possible components.
  15. FENCER SABER Occupancy Sensor

    Save energy usage with your FENCER Series SABER™ Under Cabinet Fixtures with this advanced occupancy sensor from Diode LED.


    SPECIAL ORDER ITEM ONLY.


     

  16. Occupancy Sensor Switch
    Detects motion within view of sensor at approximately 9.5 feet On/off functionality only.
  17. Passive Sensor
    Wave hand in front of sensor (within ≤ 2.3 inches) to activate lighting; wave again to deactivate lighting.
  18. Proximity Sensor
    Perfect for cabinets and drawers, the switch is off when the sensor is obstructed or blocked. It then turns on when the sensor is uncovered.
  19. SPOTMOD® LINK Accessories
    Choose any of the SPOTMOD® LINK accessories here to complete your installation.
  20. SPOTMOD® TILE Accessories
    Choose any of the SPOTMOD® Tile accessories here to complete your installation.
  21. EQUIFLUX® LED Display Graphics Lighting Connectors
    Extension cables and plug-in power connectors available.
  22. Driver Mounting Bracket
    Mounting bracket for use with select Constant Voltage Drivers.
  23. Meanwell™ Junction Box

    The Meanwell Junction Box has a silver finish with 1/2″ NPT knockouts and features easy access cover panel. Intended for contractor installations and is a NEMA 1 steel enclosure.

  24. SWITCHEX Trim Plates
    SWITCHEX® mounting accessories are the finishing touch for your SWITCHEX Driver and Dimmer Switch.
  25. LO-PRO® Junction Box - ETL Listed, NEMA 1

    A low-profile and rugged steel enclosure that complies with electrical codes requiring junction boxes to separate household and low voltage wiring.

1-25 of 67

Page
  1. 1
  2. 2
  3. 3
Set Ascending Direction
Post your comment

Diode LED