LED Lighting Accessories

Complete LED Solutions

Connectors, Wire, and Accessories

Here you'll find the final components to complete your LED lighting system.

1-25 of 32

Page
  1. 1
  2. 2
Set Descending Direction
  1. In-Wall Rated Two Conductor Wire
    UL Listed wire rated for in-wall installations.
  2. CLICKTIGHT® Tape Light Connectors
    CLICKTIGHT Connectors are an easy way to install your standard single color LED tape light out in the field.
  3. TAPEGUARD® LED Tape Light Cover
    An easy way to provide protection and diffusion for indoor LED lighting, and create an attractive and finished look.
  4. LO-PRO® Junction Box
    Patented, UL Listed electrical enclosure meets electrical code requirements and cost saving measures with easy installation of LED power supplies.
  5. DC Plug Extension Cable
    Connects directly to DC plug accessories, plug-in adapters, and the TRIANT® LED Puck Light.
  6. 8-Way Hard-Wire Splitter
    8-Way Hard-Wire Splitters are a convenient accessory for joining up to seven LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  7. 4-Way Hard Wire Terminal Block
    4-Way Terminal Blocks are a convenient accessory for joining up to three LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  8. Adapter Splice Cable - Female
    Helps provide a hard-wire connection between LED lighting and a DC adapter.
  9.  DC Splitter Plugs
    Helps connect two to five LED light sources to a single power source.
  10. RGB Light Bar Splice Pair
    The RGB LED Light Bar Splice Cable is designed to make an easy connection between our TRUE FOCUS RGB LED Light Bars and an RGB color controller.
  11. SPOTMOD® TILE Accessories
    Choose any of the SPOTMOD® Tile accessories here to complete your installation.
  12. SPOTMOD® LINK Accessories
    Choose any of the SPOTMOD® LINK accessories here to complete your installation.
  13. Proximity Sensor
    Perfect for cabinets and drawers, the switch is off when the sensor is obstructed or blocked. It then turns on when the sensor is uncovered.
  14. Passive Sensor
    Wave hand in front of sensor (within ≤ 2.3 inches) to activate lighting; wave again to deactivate lighting.
  15. Occupancy Sensor Switch
    Detects motion within view of sensor at approximately 9.5 feet On/off functionality only.
  16. EQUIFLUX® LED Display Graphics Lighting Connectors
    Extension cables and plug-in power connectors available.
  17. FENCER® Series LED Lighting Fixture Accessories
    Accessories for use with SABER and FOIL Under Cabinet Fixture models.
  18. FENCER SABER Occupancy Sensor

    Save energy usage with your FENCER Series SABER™ Under Cabinet Fixtures with this advanced occupancy sensor from Diode LED.


    SPECIAL ORDER ITEM ONLY.


     

  19. Meanwell™ Junction Box

    The Meanwell Junction Box has a silver finish with 1/2″ NPT knockouts and features easy access cover panel. Intended for contractor installations and is a NEMA 1 steel enclosure.

  20. DMX Decoder with Built-in LED Driver
    The new DMX Driver combines the operations of a low voltage 24V Class 2 LED Power Supply and a DMX Decoder into a single unit.
  21. 20 ft. DMX XLR-3 Extension Cable
    Creates an extension between DMX fixtures and accessories. Features XLR-3 connections.
  22. RJ45 Extension Cable
    Creates a 10 ft. extension between DMX fixtures and accessories utilizing RJ45 connections.
  23. XLR-3 to RJ45 Adapter Cable Pair - male
    Converts RJ45 port of 4-Channel DMX Decoder to a standard XLR-3 connection.
  24. XLR-3 to RJ45 Adapter Connector Pair (RJ45 connection shown)
    Converts RJ45 data cables to XLR-3 DMX connections. Sold by the pair (male/female).
  25. RJ45 Splice Cable
    Lead wires connect to wall-mount DMX controllers while RJ45 plug connects to DMX accessories.

1-25 of 32

Page
  1. 1
  2. 2
Set Descending Direction
Post your comment

Diode LED