LED Lighting Accessories

Complete LED Solutions

Connectors, Wire, and Accessories

Connectors, wires, and other accessories to round out your projects.

66 Item(s)

Set Descending Direction
  1. Tape Light Terminal Block Connector
    Screw down terminal connection for LED tape light and wire connections.
  2. DMX 8-Way Splitter
    Amplifies and splits DMX signals to accommodate up to 256 DMX wall washers per splitter.
  3. 12mm Tape Light Terminal Block Connector
    Create easy, fast, and secure tape light connections with the 12mm Tape Light Terminal Block Connector.
  4. Multi-Conductor PVC Jacketed 2464 Wire
    Multi-Conductor Wire offers the flexibility to accommodate large LED linear lighting installations.
  5. DC Plug Extension Cable
    Connects directly to DC plug accessories, plug-in adapters, and the TRIANT® LED Puck Light.
  6.  DC Splitter Plugs
    Helps connect two to five LED light sources to a single power source.
  7. Wet Location Male to Female Extension Cables - 10.5mm
    These extensions are available in many sizes and compatible with many of Diode LED's wet location products.
  8. Adapter Splice Cable - Female
    Helps provide a hard-wire connection between LED lighting and a DC adapter.
  9. Wire Management -  Clips and Fasteners
    Wire management accessories help keep wiring and LED tape lights organized and secure.
  10. In-Wall Rated Two Conductor Wire
    UL Listed wire rated for in-wall installations.
  11. 8-Way Hard-Wire Splitter
    8-Way Hard-Wire Splitters are a convenient accessory for joining up to seven LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  12. RJ45 Extension Cable
    Creates a 10 ft. extension between DMX fixtures and accessories utilizing RJ45 connections.
  13. 4-Way Hard Wire Terminal Block
    4-Way Terminal Blocks are a convenient accessory for joining up to three LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  14. TAPEGUARD® LED Tape Light Cover

    An easy way to provide protection and diffusion for indoor LED lighting, and create an attractive and finished look.

  15. CLICKTIGHT RGB
    DAZZLE® CLICKTIGHT® connectors are design only for use with indoor versions of DAZZLE® CLICKTIGHT® RGB & RGBW LED Tape Light and color controllers.
  16. EQUIFLUX® LED Display Graphics Lighting Connectors
    Extension cables and plug-in power connectors available.
  17. EQUIFLUX® Pop-In Fastener

    The EQUIFLUX® Pop-In Fastener is the best and safest way to mount your EQUIFLUX light to a surface. The polymer material will prevent mounted surface damage on the light, unlike metal screws or bolts that can pose a hazard to the light and its functionality.

  18. CLEARANCE: K-RANGE® CLICKTIGHT® Tape Light Connector
    CLEARANCE PRODUCT
    While supplies last!
    K-RANGE® connectors are design specifically for use with K-RANGE 24V Tunable White LED Tape Light and K-RANGE color controllers.
  19. SPOTMOD® TILE Accessories
    Choose any of the SPOTMOD® Tile accessories here to complete your installation.
  20. SPOTMOD® LINK Accessories
    Choose any of the SPOTMOD® LINK accessories here to complete your installation.
  21. Wet Location Tape Light Sealing Accessories
    The Wet Location LED Strip Light Sealing Accessories are everything needed to re-seal Wet Location Strip Light.
  22. LO-PRO® Junction Box
    UL Listed enclosure that pairs with LED drivers for code-compliant installations.
  23. CLICKTIGHT® Tape Light Connectors
    CLICKTIGHT Connectors are an easy way to install your standard single color LED tape light out in the field.
  24. CLICKTIGHT® Connectors

    CLEARANCE PRODUCT


    CLICKTIGHT® connectors perform as simple, secure, indoor/dry location connections for LED tape light.

  25. Occupancy Sensor Switch
    Detects motion within view of sensor at approximately 9.5 feet On/off functionality only.
  26. Passive Sensor
    Wave hand in front of sensor (within ≤ 2.3 inches) to activate lighting; wave again to deactivate lighting.
  27. Proximity Sensor
    Perfect for cabinets and drawers, the switch is off when the sensor is obstructed or blocked. It then turns on when the sensor is uncovered.
  28. Valent X Connector
    Connects seamlessly with VALENT X 24V LED Tape Light.
  29. Driver Mounting Bracket
    Mounting bracket for use with select Constant Voltage Drivers.
  30. DAZZLE 24® RGBW 4D Wet Location Accessories
    Accessories for use only with DAZZLE 24® 24V RGBW 4D Wet Location LED Strip Light.
  31. TRU-LINK™ Light Bar Accessories
    Accessories compatible with TRU-LINK® 24V LED Light Bars.
  32. HYDROLUME® SLIM Accessories

    ​HYDROLUME® SLIM and SLIM HD LED Strip Light​ is field cuttable and connected with these accessories.

  33. NEON BLAZE Accessories

    Connection accessories for field-install of the NEON BLAZE™.


  34. 20 ft. DMX XLR-3 Extension Cable
    Creates an extension between DMX fixtures and accessories. Features XLR-3 connections.
  35. FENCER® Series LED Lighting Fixture Accessories
    Accessories for use with SABER and FOIL Under Cabinet Fixture models.
  36. DMX XLR-3-Pin Connector Pair
    These connectors let you create custom length cables for any DMX installation.
  37. DMX Wireless Transmitter/Receiver
    The DMX Wireless Receiver/Transmitter will wirelessly send DMX signals between controllers and fixtures via XLR-3 connections.
  38. RJ45 Coupler
    Female-to-female accessory quickly connects two RJ45 accessories.
  39. RJ45 Splice Cable
    Lead wires connect to wall-mount DMX controllers while RJ45 plug connects to DMX accessories.
  40. XLR-3 to RJ45 Adapter Connector Pair (RJ45 connection shown)
    Converts RJ45 data cables to XLR-3 DMX connections. Sold by the pair (male/female).
  41. XLR-3 to RJ45 Adapter Cable Pair - male
    Converts RJ45 port of 4-Channel DMX Decoder to a standard XLR-3 connection.
  42. LO-PRO® Junction Box - ETL Listed, NEMA 1

    A low-profile and rugged steel enclosure that complies with electrical codes requiring junction boxes to separate household and low voltage wiring.

  43. SQUARE-PRO Junction Box
    CLEARANCE PRODUCT
    While supplies last!
    For in-wall installations of select DMX, wall mounted controllers.
  44. Mini Terminal Junction Box
    Compliant with electrical codes requiring two conductor connections to be within an enclosure.
  45. Commercial-Grade Mini Wire Connection Boxes
    Ideal for installations that will be inspected for electrical codes requiring two conductor connections within an enclosure.
  46. Meanwell™ Junction Box

    The Meanwell Junction Box has a silver finish with 1/2″ NPT knockouts and features easy access cover panel. Intended for contractor installations and is a NEMA 1 steel enclosure.

  47. FENCER SABER Occupancy Sensor

    Save energy usage with your FENCER Series SABER™ Under Cabinet Fixtures with this advanced occupancy sensor from Diode LED.


    SPECIAL ORDER ITEM ONLY.


     

  48. HYDROLUME™ Mounting Accessories
    Mount HYDROLUME® 24V LED Lighting in extreme environments with these accessories.
  49.  Wet Location Plug to DC Adapter Connector - 10.5mm
    Connects a wet location LED strip light with a DC adapter without splicing and soldering.
  50. 3M™ Adhesive Tape
    3M™ adhesive tape is a very high-bond double-sided adhesive tape, to install virtually any of our products on a flat clean surface.
  51. Wet Location RGB Splice Connector Pair
    The Waterproof RGB Solder Connector helps you adapt your waterproof RGB plugs to a bare wire connection for connection to an RGB color controller. Sold by the pair, these male and female plugs feature the same 4-pin plug that is hardwired on our DAZZLE 24™ Wet Location RGB Strip Light.
  52. RGB Light Bar Splice Pair
    The RGB LED Light Bar Splice Cable is designed to make an easy connection between our TRUE FOCUS RGB LED Light Bars and an RGB color controller.
  53. Wet Location LED Splitter Plug (10.5mm Plug)
    The Wet Location Splice Connector Pairs allows you to connect two, three, or five non-linear LED light fixtures to a single power source.
  54. Wet Location Splice Connector Pair (10.5mm)
    The Wet Location Splice Connector Pairs are an essential accessory for connecting a wet location LED lighting to a hard-wire connection.
  55. RGB LED Splitter Cable
    Connect two, three, or five color-changing LED light fixtures to a single power source.
  56. SWITCHEX Trim Plates
    SWITCHEX® mounting accessories are the finishing touch for your SWITCHEX Driver and Dimmer Switch.
  57. Mounting Clips
    Light bar mounting clips for CASCADE® Light Bars, SUNRISE® Light Bars, TRUE FOCUS™ LED light bars, or Wet location Strip Light
  58. DMX Decoder with Built-in LED Driver
    Driver with integrated DMX controller for integrating static color and color-changing tape light into DMX systems with the fewest possible components.
  59. VLM Junction box
    UL Listed enclosure for code-compliant installations of the VLM Series drivers.
  60. PowerTRAX
    PowerTRAX™ is a modular power distribution system for low voltage lighting in unique applications like task, retail, or display lighting.
  61. OPTICS By Diode LED® - Accessories
    Connection and Mounting accessories for OPTICS By Diode LED Linear Lighting Systems.
  62. PLENUM Wire
    Plenum and In-wall wire is a robust wire for use in dry, wet, or buried applications. Resistant to oil, gas, UV, and acid.
  63. STREAMLITE™ COB Connectors

    Connectors for STREAMLITE™ Diffused COB Linear Light.

  64. LO-PRO Junction Box for MikroDIM
    NEMA1 Junction Box for MikroDIM driver.
  65. LO-PRO NEMA3R  Junction Box
    NEMA 3R Junction Box that pairs with Diode LED drivers for outdoor installations. Certified UL 2108, UL 508A, and UL 1598
  66. NEON BLAZE™ Mounting Accessories
    Mounting accessories for field-install of the NEON BLAZE™.

66 Item(s)

Set Descending Direction
Post your comment

Diode LED