LED Lighting Accessories
Complete LED Solutions
Connectors, Wire, and Accessories
Here you'll find the final components to complete your LED lighting system.
-
Multi-Conductor Wire offers the flexibility to accommodate large LED linear lighting installations. -
Connection and Mounting accessories for OPTICS By Diode LED Linear Lighting Systems. -
DAZZLE® CLICKTIGHT® connectors are design only for use with indoor versions of DAZZLE® CLICKTIGHT® RGB & RGBW LED Tape Light and color controllers. -
CLEARANCE PRODUCT
CLICKTIGHT® connectors perform as simple, secure, indoor/dry location connections for LED tape light.
-
An easy way to provide protection and diffusion for indoor LED lighting, and create an attractive and finished look. -
CLICKTIGHT Connectors are an easy way to install your standard single color LED tape light out in the field.
-
Patent pending, UL Listed electrical enclosure meets electrical code requirements and cost saving measures with easy installation of LED power supplies. -
The Wet Location LED Strip Light Sealing Accessories are everything needed to re-seal Wet Location Strip Light. -
Choose any of the SPOTMOD® LINK accessories here to complete your installation. -
Choose any of the SPOTMOD® Tile accessories here to complete your installation. -
CLEARANCE PRODUCT
While supplies last!
K-RANGE® connectors are design specifically for use with K-RANGE 24V Tunable White LED Tape Light and K-RANGE color controllers. -
The EQUIFLUX® Pop-In Fastener is the best and safest way to mount your EQUIFLUX light to a surface. The polymer material will prevent mounted surface damage on the light, unlike metal screws or bolts that can pose a hazard to the light and its functionality.
-
Extension cables and plug-in power connectors available. -
Mounting bracket for use with select Constant Voltage Drivers.
-
Mount HYDROLUME® 24V LED Lighting in extreme environments with these accessories. -
Connects directly to DC plug accessories, plug-in adapters, and the TRIANT® LED Puck Light. -
Accessories for use only with DAZZLE 24® 24V RGBW 4D Wet Location LED Strip Light. -
Create easy, fast, and secure tape light connections with the 12mm Tape Light Terminal Block Connector. -
PowerTRAX™ is a modular power distribution system for low voltage lighting in unique applications like task, retail, or display lighting. -
The LO-PRO®: Mini Junction Box is a patented UL Listed electrical enclosure meets electrical code requirements and cost saving measures with easy installation of LED power supplies in a wide range of environments. This model is compatible exclusively with the VLM Series Drivers. -
Screw down terminal connection for LED tape light and wire connections. -
The new DMX Driver combines the operations of a low voltage 24V Class 2 LED Power Supply and a DMX Decoder into a single unit. -
Detects motion within view of sensor at a range of approximately 9.5 feet On/off functionality only. -
Wave hand in front of sensor (range ≤ 2.3 inches) to activate lighting; wave again to deactivate lighting. -
Perfect for cabinets and drawers, the switch is off when the sensor is obstructed or blocked. It then turns on when the sensor is uncovered. -
Connects seamlessly with VALENT X 24V LED Tape Light.
-
HYDROLUME® SLIM and SLIM HD LED Strip Light is field cuttable and connected with these accessories.
-
Accessories for field-install of the ultimate accent lighting. -
Use to join sections of DOUBLE BLAZE 12V LED Tape Light to each other or connect to power. -
-
The Meanwell Junction Box has a silver finish with 1/2″ NPT knockouts and features easy access cover panel. Intended for contractor installations and is a NEMA 1 steel enclosure.
-
3M™ adhesive tape is a very high-bond double-sided adhesive tape, to install virtually any of our products on a flat clean surface. -
The Waterproof RGB Solder Connector helps you adapt your waterproof RGB plugs to a bare wire connection for connection to an RGB color controller. Sold by the pair, these male and female plugs feature the same 4-pin plug that is hardwired on our DAZZLE 24™ Wet Location RGB Strip Light. -
4-Way Terminal Blocks are a convenient accessory for joining up to three LED light fixtures, LED strip light runs, or LED light bar runs to a single power source. -
CLEARANCE PRODUCT
While supplies last!
For in-wall installations of select DMX, wall mounted controllers. -
Creates an extension between DMX fixtures and accessories. Features XLR-3 connections. -
Creates a 10 ft. extension between DMX fixtures and accessories utilizing RJ45 connections. -
Converts RJ45 port of 4-Channel DMX Decoder to a standard XLR-3 connection. -
Converts RJ45 data cables to XLR-3 DMX connections. Sold by the pair (male/female). -
Lead wires connect to wall-mount DMX controllers while RJ45 plug connects to DMX accessories. -
-
The DMX Wireless Receiver/Transmitter will wirelessly send DMX signals between controllers and fixtures via XLR-3 connections. -
These connectors let you create custom length cables for any DMX installation. -
Amplifies and splits DMX signals to accommodate up to 80 DMX wall washers per splitter. -
A low-profile and rugged steel enclosure that complies with electrical codes requiring junction boxes to separate household and low voltage wiring.
-
Save energy usage with your FENCER Series SABER™ Under Cabinet Fixtures with this advanced occupancy sensor from Diode LED.
SPECIAL ORDER ITEM ONLY.
-
8-Way Hard-Wire Splitters are a convenient accessory for joining up to seven LED light fixtures, LED strip light runs, or LED light bar runs to a single power source. -
-
The RGB LED Light Bar Splice Cable is designed to make an easy connection between our TRUE FOCUS RGB LED Light Bars and an RGB color controller. -
The Wet Location Splice Connector Pairs allows you to connect two, three, or five non-linear LED light fixtures to a single power source.