LED Lighting Accessories

Complete LED Solutions

LED Lighting Accessories

Here you'll find the final components to complete your LED lighting system.

1-50 of 58

Page
  1. 1
  2. 2
Set Descending Direction
  1. Multi-Conductor PVC Jacketed 2464 Wire
    Multi-Conductor Wire offers the flexibility to accommodate large LED linear lighting installations.
  2. Wet Location Tape Light Sealing Accessories
    The Wet Location LED Strip Light Sealing Accessories are everything needed to re-seal Wet Location Strip Light.
  3. SPOTMOD® LINK Accessories
    Choose any of the SPOTMOD® LINK accessories here to complete your installation.
  4. SPOTMOD® TILE Accessories
    Choose any of the SPOTMOD® Tile accessories here to complete your installation.
  5. CLEARANCE: K-RANGE® CLICKTIGHT® Tape Light Connector
    CLEARANCE PRODUCT
    While supplies last!
    K-RANGE® connectors are design specifically for use with K-RANGE 24V Tunable White LED Tape Light and K-RANGE color controllers.
  6. EQUIFLUX® Pop-In Fastener

    The EQUIFLUX® Pop-In Fastener is the best and safest way to mount your EQUIFLUX light to a surface. The polymer material will prevent mounted surface damage on the light, unlike metal screws or bolts that can pose a hazard to the light and its functionality.

  7. EQUIFLUX® LED Display Graphics Lighting Connectors
    Extension cables and plug-in power connectors available.
  8. Driver Mounting Bracket
    Mounting bracket for use with select Constant Voltage Drivers.
  9. FENCER SABER Occupancy Sensor

    Save energy usage with your FENCER Series SABER™ Under Cabinet Fixtures with this advanced occupancy sensor from Diode LED.


    SPECIAL ORDER ITEM ONLY.


     

  10. CLICKTIGHT® PRO Tape Light Connector
    CLICKTIGHT® PRO is the innovative and patent-pending connector from Diode LED that ensures a secure solderless connection for tape light applications.
  11. HYDROLUME™ Mounting Accessories
    Mount HYDROLUME® 24V LED Lighting in extreme environments with these accessories.
  12. Meanwell™ Junction Box

    The Meanwell Junction Box has a silver finish with 1/2″ NPT knockouts and features easy access cover panel. Intended for contractor installations and is a NEMA 1 steel enclosure.

  13. RGB Extension Cable
    The RGB Extension Cable is a great accessory that offers the flexibility you need in a large full color LED installation.
  14. Wet Location RGB Extension Cable
    The Wet Location RGB Extension Cable is a great accessory that offers the flexibility you need in a large, outdoor or indoor full color LED installation.
  15. LO-PRO® Junction Box
    Patent pending, UL Listed electrical enclosure meets electrical code requirements and cost saving measures with easy installation of LED power supplies.
  16. CLICKTIGHT® Tape Light Connectors
    CLICKTIGHT Connectors are an easy way to install your standard single color LED tape light out in the field.
  17. Occupancy Sensor Switch
    Detects motion within view of sensor at a range of approximately 9.5 feet On/off functionality only.
  18. Passive Sensor
    Wave hand in front of sensor (range ≤ 2.3 inches) to activate lighting; wave again to deactivate lighting.
  19. Proximity Sensor
    Perfect for cabinets and drawers, the switch is off when the sensor is obstructed or blocked. It then turns on when the sensor is uncovered.
  20. HYDROLUME® SLIM Accessories

    ​HYDROLUME® SLIM and SLIM HD LED Strip Light​ is field cuttable and connected with these accessories.

  21. NEON BLAZE Accessories
    Accessories for field-install of the ultimate accent lighting.
  22. DOUBLE BLAZE™ LED Tape Light Connectors
    Use to join sections of DOUBLE BLAZE 12V LED Tape Light to each other or connect to power.
  23. TRU-LINK™ Light Bar Accessories
    Accessories compatible with TRU-LINK® 24V LED Light Bars.
  24. DAZZLE 24® 24V RGBW 4D Wet Location Accessories
    Accessories for use only with DAZZLE 24® 24V RGBW 4D Wet Location LED Strip Light.
  25. DC Plug Extension Cable
    Connects directly to DC plug accessories, plug-in adapters, and the TRIANT® LED Puck Light.
  26. CLICKTIGHT RGB
    DAZZLE® CLICKTIGHT® connectors are design only for use with indoor versions of DAZZLE® CLICKTIGHT® RGB & RGBW LED Tape Light and color controllers.
  27. CLICKTIGHT® Connectors

    CLEARANCE PRODUCT


    CLICKTIGHT® connectors perform as simple, secure, indoor/dry location connections for LED tape light.

  28. TAPEGUARD® LED Tape Light Cover
    An easy way to provide protection and diffusion for indoor LED lighting, and create an attractive and finished look.
  29. 3M™ Adhesive Tape
    3M™ adhesive tape is a very high-bond double-sided adhesive tape, to install virtually any of our products on a flat clean surface.
  30. Wet Location RGB Splice Connector Pair
    The Waterproof RGB Solder Connector helps you adapt your waterproof RGB plugs to a bare wire connection for connection to an RGB color controller. Sold by the pair, these male and female plugs feature the same 4-pin plug that is hardwired on our DAZZLE 24™ Wet Location RGB Strip Light.
  31. 4-Way Hard Wire Terminal Block
    4-Way Terminal Blocks are a convenient accessory for joining up to three LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  32. SQUARE-PRO Junction Box
    CLEARANCE PRODUCT
    While supplies last!
    For in-wall installations of select DMX, wall mounted controllers.
  33. 20 ft. DMX XLR-3 Extension Cable
    Creates an extension between DMX fixtures and accessories. Features XLR-3 connections.
  34. RJ45 Extension Cable
    Creates a 10 ft. extension between DMX fixtures and accessories utilizing RJ45 connections.
  35. XLR-3 to RJ45 Adapter Cable Pair - male
    Converts RJ45 port of 4-Channel DMX Decoder to a standard XLR-3 connection.
  36. XLR-3 to RJ45 Adapter Connector Pair (RJ45 connection shown)
    Converts RJ45 data cables to XLR-3 DMX connections. Sold by the pair (male/female).
  37. RJ45 Splice Cable
    Lead wires connect to wall-mount DMX controllers while RJ45 plug connects to DMX accessories.
  38. RJ45 Coupler
    Female-to-female accessory quickly connects two RJ45 accessories.
  39. DMX Wireless Transmitter/Receiver
    The DMX Wireless Receiver/Transmitter will wirelessly send DMX signals between controllers and fixtures via XLR-3 connections.
  40. DMX XLR-3-Pin Connector Pair
    These connectors let you create custom length cables for any DMX installation.
  41. DMX 8-Way Splitter
    Amplifies and splits DMX signals to accommodate up to 80 DMX wall washers per splitter.
  42. FENCER® Series LED Lighting Fixture Accessories
    Accessories for use with SABER and FOIL Under Cabinet Fixture models.
  43. 8-Way Hard-Wire Splitter
    8-Way Hard-Wire Splitters are a convenient accessory for joining up to seven LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  44. In-Wall Rated Two Conductor Wire
    UL Listed wire rated for in-wall installations.
  45. Mini Terminal Junction Box
    Compliant with electrical codes requiring two conductor connections to be within an enclosure.
  46. RGB Light Bar Splice Pair
    The RGB LED Light Bar Splice Cable is designed to make an easy connection between our TRUE FOCUS RGB LED Light Bars and an RGB color controller.
  47. Wet Location LED Splitter Plug (10.5mm Plug)
    The Wet Location Splice Connector Pairs allows you to connect two, three, or five non-linear LED light fixtures to a single power source.
  48. Wet Location Splice Connector Pair (10.5mm)
    The Wet Location Splice Connector Pairs are an essential accessory for connecting a wet location LED lighting to a hard-wire connection.
  49. RGB LED Splitter Cable
    Connect two, three, or five color-changing LED light fixtures to a single power source.
  50. SWITCHEX Trim Plates
    SWITCHEX® mounting accessories are the finishing touch for your SWITCHEX Driver and Dimmer Switch.

1-50 of 58

Page
  1. 1
  2. 2
Set Descending Direction
Post your comment

Diode LED