Diode LED is a brand of Elemental LED

Ordering List Contact Us
Connectors, Wire, and Accessories

Diode LED holds patents on some of the leading connectors in the industry and supports installation accessories for all environments.

Brazzaville House (Republic of Congo)
Ean Carr
Shop By
Open All | Close All

Filter

Light Family
  1. VALENT® (1)
Remote Control Type
  1. n/a (1)

Connectors, Wire, and Accessories

Connectors, wires, and other accessories to round out your projects.

26-50 of 62

Page
  2. 1
  3. 2
  4. 3
Set Descending Direction
  1. CLICKTIGHT® Tape Light Connectors

    CLICKTIGHT® Tape Light Connectors

    CLICKTIGHT Connectors are an easy way to install your standard single color LED tape light out in the field.
  2. NEON BLAZE Accessories

    NEON BLAZE™ Connector Accessories

    Connection accessories for field-install of the NEON BLAZE™.


  3. Proximity Sensor

    Proximity Sensor Switch

    Perfect for cabinets and drawers, the switch is off when the sensor is obstructed or blocked. It then turns on when the sensor is uncovered.
  4. Passive Sensor

    Passive Sensor Switch

    Wave hand in front of sensor (within ≤ 2.3 inches) to activate lighting; wave again to deactivate lighting.
  5. Occupancy Sensor Switch

    Occupancy Sensor Switch

    Detects motion within view of sensor at approximately 9.5 feet On/off functionality only.
  6. VLM Junction box

    LO-PRO® Mini Junction Box, NEMA 1 - UL Listed

    UL Listed enclosure for code-compliant installations of the VLM Series drivers.
  7. STREAMLITE™ COB Connectors

    Locking Connectors

    Connectors for 8mm Tape Light.
  8. LO-PRO Junction Box for MikroDIM

    LO-PRO Junction Box for MikroDIM - NEMA 1

    NEMA1 Junction Box for MikroDIM driver.
  9. LO-PRO NEMA3R Junction Box

    LO-PRO NEMA3R Wet Location Junction Box - UL Listed

    NEMA 3R Junction Box that pairs with Diode LED drivers for outdoor installations. Certified UL 2108, UL 508A, and UL 1598
  10. DMX 8-Way Splitter

    DMX 8-Way Splitter

    Amplifies and splits DMX signals to accommodate up to 256 DMX wall washers per splitter.

  11. LO-PRO® Junction Box

    LO-PRO® Junction Box, NEMA 1 - UL Listed

    UL Listed enclosure that pairs with LED drivers for code-compliant installations.
  12. Wet Location Tape Light Sealing Accessories

    Wet Location Tape Light Sealing Accessories

    The Wet Location LED Strip Light Sealing Accessories are everything needed to re-seal Wet Location Strip Light.
  13. Mini Terminal Junction Box

    Mini Terminal Junction Box

    Compliant with electrical codes requiring two conductor connections to be within an enclosure.
  14. Commercial-Grade Mini Wire Connection Boxes

    Commercial-Grade Mini Wire Connection Boxes

    Ideal for installations that will be inspected for electrical codes requiring two conductor connections within an enclosure.
  15. Wet Location Plug to DC Adapter Connector - 10.5mm

    Wet Location Plug to DC Adapter Connector

    Connects a wet location LED strip light with a DC adapter without splicing and soldering.
  16. Mounting Clips

    Mounting Clips

    Light bar mounting clips for CASCADE® Light Bars, SUNRISE® Light Bars, TRUE FOCUS™ LED light bars, or Wet location Strip Light
  17. RGB LED Splitter Cable

    RGB LED Splitter Cable

    Connect two, three, or five color-changing LED light fixtures to a single power source.
  18. Wet Location Splice Connector Pair (10.5mm)

    Wet Location Splice Connector Pair

    The Wet Location Splice Connector Pairs are an essential accessory for connecting a wet location LED lighting to a hard-wire connection.
  19. Wet Location LED Splitter Plug (10.5mm Plug)

    Wet Location LED Splitter Plug

    The Wet Location Splice Connector Pairs allows you to connect two, three, or five non-linear LED light fixtures to a single power source.
  20. Wet Location RGB Splice Connector Pair

    Wet Location RGB Splice Connector Pair

    The Waterproof RGB Solder Connector helps you adapt your waterproof RGB plugs to a bare wire connection for connection to an RGB color controller. Sold by the pair, these male and female plugs feature the same 4-pin plug that is hardwired on our DAZZLE 24™ Wet Location RGB Strip Light.
  21. Meanwell™ Junction Box

    MEAN WELL™ Junction Box

    The Meanwell Junction Box has a silver finish with 1/2″ NPT knockouts and features easy access cover panel. Intended for contractor installations and is a NEMA 1 steel enclosure.

  22. SPOTMOD® TILE Accessories

    SPOTMOD® TILE Accessories

    Choose any of the SPOTMOD® Tile accessories here to complete your installation.
  23. DAZZLE® RGBW 4D Wet Location Accessories

    DAZZLE® RGBW 4D Wet Location Accessories

    Accessories for use only with DAZZLE 24® 24V RGBW 4D Wet Location LED Strip Light.
  24. CLICKTIGHT RGB

    RGB(W) Tape Light Connectors

    Connectors are design only for use with indoor versions of DAZZLE® CLICKTIGHT® RGB & RGBW LED Tape Light and color controllers.
  25. SWITCHEX Trim Plates

    SWITCHEX® Accessories

    SWITCHEX® mounting accessories are the finishing touch for your SWITCHEX Driver and Dimmer Switch.

26-50 of 62

Page
  2. 1
  3. 2
  4. 3
Set Descending Direction

  • Resources

  • Find IES files, LM79 reports, Specification Sheets, Install Guides, Voltage Drop Charts, compatibility lists and more.

  • About Us

  • America's largest provider of low-voltage linear lighting solutions preferred by lighting designers, architects, product specifiers, electricians, and general contractors.

© 2025 Elemental LED, Inc.
Post your comment

Diode LED