LED Lighting Accessories

Complete LED Solutions

LED Lighting Accessories

Here you'll find the final components to complete your LED lighting system.

1-25 of 33

Page
  1. 1
  2. 2
Set Descending Direction
  1. Multi-Conductor PVC Jacketed 2464 Wire
    Multi-Conductor Wire offers the flexibility to accommodate large LED linear lighting installations.
  2. SPOTMOD® LINK Accessories
    Choose any of the SPOTMOD® LINK accessories here to complete your installation.
  3. SPOTMOD® TILE Accessories
    Choose any of the SPOTMOD® Tile accessories here to complete your installation.
  4. CLEARANCE: K-RANGE® CLICKTIGHT® Tape Light Connector
    CLEARANCE PRODUCT
    While supplies last!
    K-RANGE® connectors are design specifically for use with K-RANGE 24V Tunable White LED Tape Light and K-RANGE color controllers.
  5. EQUIFLUX® LED Display Graphics Lighting Connectors
    Extension cables and plug-in power connectors available.
  6. Meanwell™ Junction Box

    The Meanwell Junction Box has a silver finish with 1/2″ NPT knockouts and features easy access cover panel. Intended for contractor installations and is a NEMA 1 steel enclosure.

  7. RGB Extension Cable
    The RGB Extension Cable is a great accessory that offers the flexibility you need in a large full color LED installation.
  8. CLICKTIGHT® Tape Light Connectors
    CLICKTIGHT Connectors are an easy way to install your standard single color LED tape light out in the field.
  9. TAPEGUARD® LED Tape Light Cover
    An easy way to provide protection and diffusion for indoor LED lighting, and create an attractive and finished look.
  10. Occupancy Sensor Switch
    Detects motion within view of sensor at a range of approximately 9.5 feet On/off functionality only.
  11. Passive Sensor
    Wave hand in front of sensor (range ≤ 2.3 inches) to activate lighting; wave again to deactivate lighting.
  12. Proximity Sensor
    Perfect for cabinets and drawers, the switch is off when the sensor is obstructed or blocked. It then turns on when the sensor is uncovered.
  13. Valent X Connector
    Connects seamlessly with VALENT X 24V LED Tape Light.
    COMING SOON!
  14. DOUBLE BLAZE™ LED Tape Light Connectors
    Use to join sections of DOUBLE BLAZE 12V LED Tape Light to each other or connect to power.
  15. DAZZLE 24® 24V RGBW 4D Wet Location Accessories
    Accessories for use only with DAZZLE 24® 24V RGBW 4D Wet Location LED Strip Light.
  16. DC Plug Extension Cable
    Connects directly to DC plug accessories, plug-in adapters, and the TRIANT® LED Puck Light.
  17. CLICKTIGHT RGB
    DAZZLE® CLICKTIGHT® connectors are design only for use with indoor versions of DAZZLE® CLICKTIGHT® RGB & RGBW LED Tape Light and color controllers.
  18. CLICKTIGHT® Connectors

    CLEARANCE PRODUCT


    CLICKTIGHT® connectors perform as simple, secure, indoor/dry location connections for LED tape light.

  19. Wet Location RGB Extension Cable
    The Wet Location RGB Extension Cable is a great accessory that offers the flexibility you need in a large, outdoor or indoor full color LED installation.
  20. Wet Location RGB Splice Connector Pair
    The Waterproof RGB Solder Connector helps you adapt your waterproof RGB plugs to a bare wire connection for connection to an RGB color controller. Sold by the pair, these male and female plugs feature the same 4-pin plug that is hardwired on our DAZZLE 24™ Wet Location RGB Strip Light.
  21. 4-Way Hard Wire Terminal Block
    4-Way Terminal Blocks are a convenient accessory for joining up to three LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  22. 8-Way Hard-Wire Splitter
    8-Way Hard-Wire Splitters are a convenient accessory for joining up to seven LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  23. RGB Light Bar Splice Pair
    The RGB LED Light Bar Splice Cable is designed to make an easy connection between our TRUE FOCUS RGB LED Light Bars and an RGB color controller.
  24. Wet Location LED Splitter Plug (10.5mm Plug)
    The Wet Location Splice Connector Pairs allows you to connect two, three, or five non-linear LED light fixtures to a single power source.
  25. Wet Location Splice Connector Pair (10.5mm)
    The Wet Location Splice Connector Pairs are an essential accessory for connecting a wet location LED lighting to a hard-wire connection.

1-25 of 33

Page
  1. 1
  2. 2
Set Descending Direction
Post your comment

Diode LED