This website uses cookies to ensure you the best experience. Learn more
Fixtures & Display Lighting
New York, NY
High-impact, easy to install LED lighting solutions.
These Diode LED fixtures meet specific needs such as 120V direct-wire task lighting and discreet, aimable accent lighting. The low-voltage options are compatible with the same popular LED drivers we offer for our extensive line of tape light products.
SABER™ makes installation simple for soft, diffused under cabinet and task lighting. These 120V direct-wire LED fixtures feature five field-selectable color temperatures (CCTs) to please every customer.
The SPOTMOD® TILE & LINK LED Fixtures are an ultra-bright and low-profile fixture for surface mounting onto most surfaces. Daisy chainable connectors for multi-fixture installations.
Currently Shopping by:
- Remove This Item Category: Diode LED
Filter
- Category
- Lumen Range
- Mounting
- Environment / IP Rating
- Compatible Dimmers and Control Systems
- Cuttable Increments
- Output Voltage
- Remote Control Type
- Input Voltage
- Max. Run
-
- N/A (6)
- See Specification Sheet (16)
- Up to 14 ft. (2)
- Up to 17.5 ft. (1)
- Up to 29 ft. (3)
- Up to 42 ft. (1)
- Up to 9.8 ft. (1)
- Up to 10 ft. (1)
- Up to 16 ft. (2)
- Up to 16.4 ft. (20)
- Up to 19 ft. (2)
- Up to 20 ft. (9)
- Up to 21 ft. (2)
- Up to 22 ft. (4)
- Up to 27 ft. (3)
- Up to 30 ft. (3)
- Up to 32.8 ft. (5)
- Up to 33 ft. (1)
- Up to 37 ft. (2)
- Up to 40 ft. (6)
- Up to 41 ft. (1)
- Up to 45 ft. (2)
- Up to 53 ft. (1)
- Up to 55 ft. (6)
- Up to 62 ft. (1)
- Up to 65.5 ft. (4)
- Up to 70 ft. (2)
- Up to 75 ft. (1)
- Up to 80 ft. (1)
- Up to 164 ft. (1)
- up to 65.6 ft. (2)
- Environment / IP Rating
Fixtures & Display Lighting
These Diode LED fixtures meet specific needs such as 120V direct-wire task lighting and discreet, aimable accent lighting. The low-voltage options are compatible with the same popular LED drivers we offer for our extensive line of tape light products.
-
ENVI-Light® Color Tunable Mirror
2019 SAPPHIRE AWARDS FINALIST
ENVI-Light® is a tunable light mirror that previews your true beauty in any light before you arrive to your destination.
-
FENCER® Series LED Lighting Fixture Accessories
Accessories for use with SABER and FOIL Under Cabinet Fixture models. -
LO-PRO® Junction Box - ETL Listed, NEMA 1
A low-profile and rugged steel enclosure that complies with electrical codes requiring junction boxes to separate household and low voltage wiring.
-
REIGN® Wall Mount LED Dimmer Switches
These low voltage dimmers offer smooth dimming from 100% - 1% with no flickering, humming, or jumping. -
DAZZLE® RGB
RGB tape light for color changing applications.
-
SIDEWINDER™ 12V LED Tape Light
These phased-out products will not be offered past 2019 with limited availability on certain SKUs in the near term. Call Diode LED Customer Service for availability. Click here for the most up-to-date tape light offerings.
-
RJ45 Coupler
Female-to-female accessory quickly connects two RJ45 accessories. -
RJ45 Splice Cable
Lead wires connect to wall-mount DMX controllers while RJ45 plug connects to DMX accessories. -
XLR-3 to RJ45 Adapter Connector Pair
Converts RJ45 data cables to XLR-3 DMX connections. Sold by the pair (male/female). -
XLR-3 to RJ45 Adapter Cable Pair
Converts RJ45 port of 4-Channel DMX Decoder to a standard XLR-3 connection. -
RJ45 Extension Cable
Creates a 10 ft. extension between DMX fixtures and accessories utilizing RJ45 connections. -
20 ft. DMX XLR-3 Extension Cable
Creates an extension between DMX fixtures and accessories. Features XLR-3 connections. -
4-Way Hard Wire Terminal Block
4-Way Terminal Blocks are a convenient accessory for joining up to three LED light fixtures, LED strip light runs, or LED light bar runs to a single power source. -
8-Way Hard-Wire Splitter
8-Way Hard-Wire Splitters are a convenient accessory for joining up to seven LED light fixtures, LED strip light runs, or LED light bar runs to a single power source. -
In-Wall Rated Two Conductor Wire
UL Listed wire rated for in-wall installations. -
Multi-Conductor Wire
Multi-Conductor Wire offers the flexibility to accommodate large LED linear lighting installations. -
Wire Management – Clips and Fasteners
Wire management accessories help keep wiring and LED tape lights organized and secure. -
SWITCHEX® Driver and Dimmer Switch
LED driver and dimmer switch combined in a single gang box. Simplify your installation and save labor costs. -
Adapter Splice Cable
Helps provide a hard-wire connection between LED lighting and a DC adapter. -
Wet Location Male to Female Extension Cables
These extensions are available in many sizes and compatible with many of Diode LED's wet location products. -
DC Splitter Plugs
Helps connect two to five LED light sources to a single power source. -
Wet Location Plug to DC Adapter Connector
Connects a wet location LED strip light with a DC adapter without splicing and soldering. -
Mounting Clips
Light bar mounting clips for CASCADE® Light Bars, SUNRISE® Light Bars, TRUE FOCUS™ LED light bars, or Wet location Strip Light -
SWITCHEX® Accessories
SWITCHEX® mounting accessories are the finishing touch for your SWITCHEX Driver and Dimmer Switch. -
RGB LED Splitter Cable
Connect two, three, or five color-changing LED light fixtures to a single power source. -
Wet Location Splice Connector Pair
The Wet Location Splice Connector Pairs are an essential accessory for connecting a wet location LED lighting to a hard-wire connection. -
Wet Location LED Splitter Plug
The Wet Location Splice Connector Pairs allows you to connect two, three, or five non-linear LED light fixtures to a single power source. -
RGB Light Bar Splice Pair
The RGB LED Light Bar Splice Cable is designed to make an easy connection between our TRUE FOCUS RGB LED Light Bars and an RGB color controller. -
Wet Location RGB Splice Connector Pair
The Waterproof RGB Solder Connector helps you adapt your waterproof RGB plugs to a bare wire connection for connection to an RGB color controller. Sold by the pair, these male and female plugs feature the same 4-pin plug that is hardwired on our DAZZLE 24™ Wet Location RGB Strip Light. -
3M™ Adhesive Tape
3M™ adhesive tape is a very high-bond double-sided adhesive tape, to install virtually any of our products on a flat clean surface. -
MEAN WELL™ Junction Box
The Meanwell Junction Box has a silver finish with 1/2″ NPT knockouts and features easy access cover panel. Intended for contractor installations and is a NEMA 1 steel enclosure.
-
HYDROLUME® Mounting Accessories
Mount HYDROLUME® 24V LED Lighting in extreme environments with these accessories. -
TOUCHDIAL™ Control System
NEW & EXPANDED ACCESSORIES
The new TOUCHDIAL™ zone control system controls single color dimming, tunable white, and color changing LED lighting via mobile device and additional TOUCHDIAL controls. -
SPOTMOD® TILE LED Fixture
The SPOTMOD® TILE LED Fixture is an ultra-bright and low-profile fixture for surface mounting onto most surfaces.
-
SPOTMOD® LINK LED Fixture
The SPOTMOD® LINK features daisy chain connectors for multi-fixture installations (up to seven) and can be surface mounted or recess mounted.
-
DMX Wall Mount Controller
DMX wall-mounted color control systems provide professional-level control of color-changing RGB and RGBW LED lighting in one or multiple independent areas. -
Nicolaudie STICK-GA2 DMX LED Controller
The sleek, attractive, touch-sensitive surface lets you control and dim color-changing lights, as well as dim single color LED lights. -
ATTRIBUTE® Color Controller
The ATTRIBUTE® Color Controller for RGB and RGB(W) LED lighting is affordable, flexible, and easy to install.
-
Driver Mounting Bracket (set of 4)
Mounting bracket for use with select Constant Voltage Drivers.
-
EQUIFLUX® 1055 LED Display Graphics Light
An ultra-bright, uniform display light with no hot spots or shadows, with a 10x55 beam angle ideally suited for narrow display frameworks. -
EQUIFLUX® LED Display Graphics Lighting Connectors
Extension cables and plug-in power connectors available. -
EQUIFLUX® Pop-In Fastener
The EQUIFLUX® Pop-In Fastener is the best and safest way to mount your EQUIFLUX light to a surface. The polymer material will prevent mounted surface damage on the light, unlike metal screws or bolts that can pose a hazard to the light and its functionality.
-
LIGHT GUIDE PANELS
Built to order in Reno, Nevada, Diode LED Light Guide Panels provide even, diffused light for backlighting and displays.
-
SPOTMOD® TILE Accessories
Choose any of the SPOTMOD® Tile accessories here to complete your installation. -
SPOTMOD® LINK Accessories
Choose any of the SPOTMOD® LINK accessories here to complete your installation. -
Wet Location Tape Light Sealing Accessories
The Wet Location LED Strip Light Sealing Accessories are everything needed to re-seal Wet Location Strip Light. -
PURALIGHT® 2 LED Light Module
The PURALIGHT® 2 LED Light Modules come in multi-unit strands of water resistant, durable modules that are ready to perform in all environments. -
SLIM Channel (Components)
Classic low profile for most tape lights.
-
SQUARE Channel (Components)
Sturdy profile with many mounting options.
-
45º Channel (Components)
Sturdy angled profile.