LED Lighting Accessories

Complete LED Solutions

Connectors, Wire, and Accessories

Here you'll find the final components to complete your LED lighting system.

26-50 of 61

Set Ascending Direction
  1. DOUBLE BLAZE™ LED Tape Light Connectors
    Use to join sections of DOUBLE BLAZE 12V LED Tape Light to each other or connect to power.
  2. TRU-LINK™ Light Bar Accessories
    Accessories compatible with TRU-LINK® 24V LED Light Bars.
  3. DAZZLE 24® RGBW 4D Wet Location Accessories
    Accessories for use only with DAZZLE 24® 24V RGBW 4D Wet Location LED Strip Light.
  4. DC Plug Extension Cable
    Connects directly to DC plug accessories, plug-in adapters, and the TRIANT® LED Puck Light.
  5. 3M™ Adhesive Tape
    3M™ adhesive tape is a very high-bond double-sided adhesive tape, to install virtually any of our products on a flat clean surface.
  6. Wet Location RGB Splice Connector Pair
    The Waterproof RGB Solder Connector helps you adapt your waterproof RGB plugs to a bare wire connection for connection to an RGB color controller. Sold by the pair, these male and female plugs feature the same 4-pin plug that is hardwired on our DAZZLE 24™ Wet Location RGB Strip Light.
  7. RGB Light Bar Splice Pair
    The RGB LED Light Bar Splice Cable is designed to make an easy connection between our TRUE FOCUS RGB LED Light Bars and an RGB color controller.
  8. SQUARE-PRO Junction Box
    CLEARANCE PRODUCT
    While supplies last!
    For in-wall installations of select DMX, wall mounted controllers.
  9. 20 ft. DMX XLR-3 Extension Cable
    Creates an extension between DMX fixtures and accessories. Features XLR-3 connections.
  10. RJ45 Extension Cable
    Creates a 10 ft. extension between DMX fixtures and accessories utilizing RJ45 connections.
  11. XLR-3 to RJ45 Adapter Cable Pair - male
    Converts RJ45 port of 4-Channel DMX Decoder to a standard XLR-3 connection.
  12. XLR-3 to RJ45 Adapter Connector Pair (RJ45 connection shown)
    Converts RJ45 data cables to XLR-3 DMX connections. Sold by the pair (male/female).
  13. RJ45 Splice Cable
    Lead wires connect to wall-mount DMX controllers while RJ45 plug connects to DMX accessories.
  14. RJ45 Coupler
    Female-to-female accessory quickly connects two RJ45 accessories.
  15. DMX Wireless Transmitter/Receiver
    The DMX Wireless Receiver/Transmitter will wirelessly send DMX signals between controllers and fixtures via XLR-3 connections.
  16. DMX XLR-3-Pin Connector Pair
    These connectors let you create custom length cables for any DMX installation.
  17. DMX 8-Way Splitter
    Amplifies and splits DMX signals to accommodate up to 80 DMX wall washers per splitter.
  18. LO-PRO® Junction Box (ETL Cert.)

    A low-profile and rugged steel enclosure that complies with electrical codes requiring junction boxes to separate household and low voltage wiring.

  19. FENCER SABER Occupancy Sensor

    Save energy usage with your FENCER Series SABER™ Under Cabinet Fixtures with this advanced occupancy sensor from Diode LED.


    SPECIAL ORDER ITEM ONLY.


     

  20. 4-Way Hard Wire Terminal Block
    4-Way Terminal Blocks are a convenient accessory for joining up to three LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  21. 8-Way Hard-Wire Splitter
    8-Way Hard-Wire Splitters are a convenient accessory for joining up to seven LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  22. In-Wall Rated Two Conductor Wire
    UL Listed wire rated for in-wall installations.
  23. Wet Location LED Splitter Plug (10.5mm Plug)
    The Wet Location Splice Connector Pairs allows you to connect two, three, or five non-linear LED light fixtures to a single power source.
  24. Wet Location Splice Connector Pair (10.5mm)
    The Wet Location Splice Connector Pairs are an essential accessory for connecting a wet location LED lighting to a hard-wire connection.
  25. RGB LED Splitter Cable
    Connect two, three, or five color-changing LED light fixtures to a single power source.

26-50 of 61

Set Ascending Direction
Post your comment

Diode LED