LED Lighting Accessories

Complete LED Solutions

Connectors, Wire, and Accessories

Connectors, wires, and other accessories to round out your projects.

1-25 of 30

Page
  1. 1
  2. 2
Set Descending Direction
  1. Adapter Splice Cable - Female
    Helps provide a hard-wire connection between LED lighting and a DC adapter.
  2. 8-Way Hard-Wire Splitter
    8-Way Hard-Wire Splitters are a convenient accessory for joining up to seven LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  3. DC Plug Extension Cable
    Connects directly to DC plug accessories, plug-in adapters, and the TRIANT® LED Puck Light.
  4.  DC Splitter Plugs
    Helps connect two to five LED light sources to a single power source.
  5. RJ45 Extension Cable
    Creates a 10 ft. extension between DMX fixtures and accessories utilizing RJ45 connections.
  6. In-Wall Rated Two Conductor Wire
    UL Listed wire rated for in-wall installations.
  7. 4-Way Hard Wire Terminal Block
    4-Way Terminal Blocks are a convenient accessory for joining up to three LED light fixtures, LED strip light runs, or LED light bar runs to a single power source.
  8. TAPEGUARD® LED Tape Light Cover

    An easy way to provide protection and diffusion for indoor LED lighting, and create an attractive and finished look.

  9. EQUIFLUX® LED Display Graphics Lighting Connectors
    Extension cables and plug-in power connectors available.
  10. CLICKTIGHT® Tape Light Connectors
    CLICKTIGHT Connectors are an easy way to install your standard single color LED tape light out in the field.
  11. Passive Sensor
    Wave hand in front of sensor (within ≤ 2.3 inches) to activate lighting; wave again to deactivate lighting.
  12. FENCER® Series LED Lighting Fixture Accessories
    Accessories for use with SABER and FOIL Under Cabinet Fixture models.
  13. XLR-3 to RJ45 Adapter Cable Pair - male
    Converts RJ45 port of 4-Channel DMX Decoder to a standard XLR-3 connection.
  14. Meanwell™ Junction Box

    The Meanwell Junction Box has a silver finish with 1/2″ NPT knockouts and features easy access cover panel. Intended for contractor installations and is a NEMA 1 steel enclosure.

  15. SPOTMOD® LINK Accessories
    Choose any of the SPOTMOD® LINK accessories here to complete your installation.
  16. RJ45 Splice Cable
    Lead wires connect to wall-mount DMX controllers while RJ45 plug connects to DMX accessories.
  17. SQUARE-PRO Junction Box
    CLEARANCE PRODUCT
    While supplies last!
    For in-wall installations of select DMX, wall mounted controllers.
  18. CLEARANCE: K-RANGE® CLICKTIGHT® Tape Light Connector
    CLEARANCE PRODUCT
    While supplies last!
    K-RANGE® connectors are design specifically for use with K-RANGE 24V Tunable White LED Tape Light and K-RANGE color controllers.
  19. Occupancy Sensor Switch
    Detects motion within view of sensor at approximately 9.5 feet On/off functionality only.
  20. DMX Wireless Transmitter/Receiver
    The DMX Wireless Receiver/Transmitter will wirelessly send DMX signals between controllers and fixtures via XLR-3 connections.
  21. FENCER SABER Occupancy Sensor

    Save energy usage with your FENCER Series SABER™ Under Cabinet Fixtures with this advanced occupancy sensor from Diode LED.


    SPECIAL ORDER ITEM ONLY.


     

  22. LO-PRO® Junction Box
    UL Listed enclosure that pairs with LED drivers for code-compliant installations.
  23. Proximity Sensor
    Perfect for cabinets and drawers, the switch is off when the sensor is obstructed or blocked. It then turns on when the sensor is uncovered.
  24. XLR-3 to RJ45 Adapter Connector Pair (RJ45 connection shown)
    Converts RJ45 data cables to XLR-3 DMX connections. Sold by the pair (male/female).
  25. RGB Light Bar Splice Pair
    The RGB LED Light Bar Splice Cable is designed to make an easy connection between our TRUE FOCUS RGB LED Light Bars and an RGB color controller.

1-25 of 30

Page
  1. 1
  2. 2
Set Descending Direction
Post your comment

Diode LED