This website uses cookies to ensure you the best experience. Learn more
Fixtures & Display Lighting
New York, NY
High-impact, easy to install LED lighting solutions.
These Diode LED fixtures meet specific needs such as 120V direct-wire task lighting and discreet, aimable accent lighting. The low-voltage options are compatible with the same popular LED drivers we offer for our extensive line of tape light products.
SABER™ makes installation simple for soft, diffused under cabinet and task lighting. These 120V direct-wire LED fixtures feature five field-selectable color temperatures (CCTs) to please every customer.
The SPOTMOD® TILE & LINK LED Fixtures are an ultra-bright and low-profile fixture for surface mounting onto most surfaces. Daisy chainable connectors for multi-fixture installations.
Currently Shopping by:
- Remove This Item Category: Products
Filter
- Category
- Lumen Range
- Mounting
- Environment / IP Rating
- Compatible Dimmers and Control Systems
- Cuttable Increments
- Output Voltage
- Remote Control Type
- Input Voltage
- Max. Run
-
- N/A (6)
- See Specification Sheet (16)
- Up to 14 ft. (2)
- Up to 17.5 ft. (1)
- Up to 29 ft. (3)
- Up to 42 ft. (1)
- Up to 9.8 ft. (1)
- Up to 10 ft. (1)
- Up to 16 ft. (2)
- Up to 16.4 ft. (19)
- Up to 19 ft. (2)
- Up to 20 ft. (9)
- Up to 21 ft. (2)
- Up to 22 ft. (4)
- Up to 27 ft. (3)
- Up to 30 ft. (3)
- Up to 32.8 ft. (5)
- Up to 33 ft. (1)
- Up to 37 ft. (2)
- Up to 40 ft. (6)
- Up to 41 ft. (1)
- Up to 45 ft. (2)
- Up to 53 ft. (1)
- Up to 55 ft. (6)
- Up to 62 ft. (1)
- Up to 65.5 ft. (4)
- Up to 70 ft. (2)
- Up to 75 ft. (1)
- Up to 80 ft. (1)
- Up to 164 ft. (1)
- up to 65.6 ft. (2)
- Environment / IP Rating
Fixtures & Display Lighting
These Diode LED fixtures meet specific needs such as 120V direct-wire task lighting and discreet, aimable accent lighting. The low-voltage options are compatible with the same popular LED drivers we offer for our extensive line of tape light products.
-
Proximity Sensor Switch
Perfect for cabinets and drawers, the switch is off when the sensor is obstructed or blocked. It then turns on when the sensor is uncovered. -
Passive Sensor Switch
Wave hand in front of sensor (within ≤ 2.3 inches) to activate lighting; wave again to deactivate lighting. -
Occupancy Sensor Switch
Detects motion within view of sensor at approximately 9.5 feet On/off functionality only. -
ELEMENT FORTÉ - Linear Lighting Mounting Channel
ELEMENT™ FORTÉ Mounting Channel is Ideal for installing in all conditions with minimal presence. -
PURALIGHT® LED Light Flex Sheet
PURALIGHT® is a fully modular way to backlight your display and signage. -
DMX Decoder with Built-in LED Driver
Driver with integrated DMX controller for integrating static color and color-changing tape light into DMX systems with the fewest possible components. -
BLAZE™
Performance and value for everyday projects. Our most popular tape light, available in a wide range of color temperatures and outputs. 7 year warranty. -
BLAZE™ X
Precision-engineered tape light. Up to 300+ lumens per foot with 95+ CRI / 90+ R9. 12 year warranty. -
ETERNALUX™ <br>24V LED Light Bar
Built with an industrial grade aluminum housing with Zero Line Diffusion® lenses for anti-glare and undistorted light emissions, these light bars are engineered with the latest generation of LED light engines capable of lasting 50 years– an industry first! -
VALENT® X
Precision-engineered, high density tape light for demanding applications. Up to 800+ lumens per foot with 95+ CRI / 90+ R9. 12 year warranty.
-
BLAZE™ Wet Location
Performance and value for everyday projects. Our most popular tape light, available in a wide range of color temperatures and outputs. Suitable for wet locations (IP65). 7 year warranty.
-
SQUIGGLY™ 100+lm (Discontinued)
Phase-Out Note: SQUIGGLY 100 is available with limited inventory. Visit the SQUIGGLY 200 Product Page for the latest product update.
-
NEON BLAZE™ RGB
Diffused, neon-like LED lighting with side-bending options. Color changing for a full range of saturated colors that faithfully mimic traditional neon. Suitable for wet locations (IP65).
-
LO-PRO® Mini Junction Box, NEMA 1 - UL Listed
UL Listed enclosure for code-compliant installations of the VLM Series drivers. -
Lutron Caséta™ Smart Control System
Caséta from Lutron is a smart lighting control system that is a great solution for giving any client smart lighting control. -
BUNKR™ Commercial-Grade Plug-in Adapter
Heavy-duty plug-in LED driver.
-
INFINILINE®
Driverless 120VAC flexible linear light for long runs up to 164 feet on a single power feed. Ideal for coves, and cost-effective to install.
-
PowerTRAX™ Rail System
PowerTRAX™ is a modular power distribution system for low voltage lighting in unique applications like task, retail, or display lighting. -
BLAZE™ X Wet Location
Precision-engineered tape light for wet locations (IP65). Up to 300+ lumens per foot with 95+ CRI / 90+ R9. 12 year warranty. -
VALENT® X Wet Location
Precision-engineered, high density tape light for wet locations (IP65). Up to 500+ lumens per foot with 95+ CRI / 90+ R9. 12 year warranty.
-
BLAZE™ COLORS
Vibrant solid-color tape light.
-
CANAL Channel
Medium profile for full diffusion of lower-density tape lights.
-
GRAZER Channel
Profile with narrow grazing (24°) lens. -
BLAZE™ SELECT
Tunable white light that changes color temperature (CCT) at the push of a button or DMX controls. Change the light from warm to cool for aesthetic or circadian effects. -
Tunable White DMX512 Controller
Wall mounted tunable white light control on a touch sensitive glass surface. -
SPOTMOD® 2 Dimmable LED Fixture
The SPOTMOD® 2 is a compact and dimmable indoor/outdoor LED fixture integrates seamlessly into cabinetry, patios, gardens, shelving, and more. Available in 2 form factors. -
BLAZE™ MINI 4mm
Narrow 4mm tape light – that is ideal for lighting tight spaces. -
MUD-IN 1 in. Channel
1-inch-wide profile for recessing directly into drywall in walls or ceilings. -
MUD-IN 2 in. Channel
2-inch-wide profile for recessing directly into drywall in walls or ceilings. -
CLOSET ROD Channel
Closet rod profile for integrating lighting directly into closets in residential or hospitality environments. -
ART ROD Channel
Task lighting for art, displays, and exhibits. -
WALL ROD Channel
Round profile for general illumination. -
STREAMLITE™ Connectors
Connectors for STREAMLITE™ Diffused Linear Light.
-
MikroDIM™ Electronic Dimmable Driver
Compact, dimmable power supply with no minimum load. -
LO-PRO Junction Box for MikroDIM - NEMA 1
NEMA1 Junction Box for MikroDIM driver. -
SQUIGGLY™ 200+lm
Tape light that bends on both axes to adapt to curves and uneven spaces. -
LO-PRO NEMA3R Wet Location Junction Box - UL Listed
NEMA 3R Junction Box that pairs with Diode LED drivers for outdoor installations. Certified UL 2108, UL 508A, and UL 1598 -
NEON BLAZE™ Mounting Accessories
Mounting accessories for field-install of the NEON BLAZE™. -
GRAZE X™ Fixture
Linear grazer fixture with precise beam control. Graze with low glare in a small form factor.
-
AlphaTECH® X
Professional grade, fully diffused linear LED lighting for outdoors and indoors. Pool and Sauna rated.
-
Magnetic Dimmable Drivers
All-purpose dimmable driver for everyday tape light projects. -
OMNIDRIVE® X Dimmable Driver
Versatile driver for most high-performance dimming applications. -
TRIANT® 2 LED Puck Light 12V-24V
The TRIANT® 2 LED Puck Lights operate on a dual 12/24V platform for task and accent lighting in a small fixture.
-
12mm Tape Light Terminal Block Connector
Create easy, fast, and secure tape light connections with the 12mm Tape Light Terminal Block Connector.
How to Install Terminal Blocks Video
-
Nicolaudie® STICK-KE2 DMX LED Controller
The sleek, touch-sensitive keypad lets you select color changing mode, speed and dimming and can store up to 200 custom lighting scenes across 5 separate zones.
-
DMX 8-Way Splitter
Amplifies and splits DMX signals to accommodate up to 256 DMX wall washers per splitter. -
DMX Bundle Kits
DMX Bundle kits are the perfect starter package to control your lighting application. -
8mm Tape Light Terminal Block Connector
Screw-down connector for easy, secure connections with LED tape light. Fits inside channels for a clean, professional installation.
How to Install Terminal Blocks Video
-
STREAMLITE™ Colors
Dot-free linear lighting without any visible LEDs. Ideal for tight spaces and simple, impactful installations. Red or green color options available.
-
CASAMBI Controllers
The CASAMBI controllers will remotely control your lighting through the app - downloadable for IOS & Android.
Guide to Choosing Your CASAMBI Component
Instructional Videos on CASAMBI
-
S1 Channel
Low profile for everyday tape light installations. -
16mm Channel
Mounting channel for use with dry and wet location tape light. Install with either dry location, or wet location LED tape light for a clean, professional look. -
8mm Tape Light Terminal Block Connector (White Finish)
Screw-down connector for easy, secure connections with LED tape light. Fits inside channels for a clean, professional installation. -
VALENT® RGBW
Bright, saturated RGBW tape light for high performance color changing applications. Features a Tri-chip capable of billions of color combinations, as well as pure 3000K white light. -
STREAMLITE™
Dot-free linear lighting without any visible LEDs. Ideal for tight spaces and simple, impactful installations.
-
NEON BLAZE™ - Turtle Safe
Diffused linear lighting that is safe for turtles and other wildlife threatened by adverse lighting in beach-side environments. Field Cuttable.
-
STREAMLITE™ Wet Location
Dot-free linear lighting without any visible LEDs. Ideal for tight spaces and simple, impactful installations. Suitable for wet locations (IP65).
-
VALENT® Warm Dim
High density tape light that glows warmer as it dims. -
STREAMLITE™ Tunable White
Dot-free linear lighting without any visible LEDs. Ideal for tight spaces and simple, impactful installations. Color temperature (CCT) adjustable from 2700K-6500K.
-
SABER™ LED Under Cabinet Light Accessories
SABER Accessories for easy-to-install 120V fixtures for under cabinet and task lighting. Field switchable between five built-in CCT options. Fixture Page | -
SABER™ LED Under Cabinet Light
Easy-to-install 120V fixtures for under cabinet and task lighting. Field switchable between five built-in CCT options.
Accessories Page | -
VALENT®
Versatile, high-density tape light for most applications. Full diffusion and dotless light when paired with channels. -
VALENT® Wet Location
Versatile, high-density tape light for most applications. Full diffusion and dotless light when paired with channels. Suitable for wet locations (IP65). -
SPOTMOD® PUCK
Compact, dimmable LED fixture that integrates seamlessly into cabinetry, drywall, displays, and more. Suitable for indoor locations. -
VALENT® Warm Dim Wet Location LED Tape Light
High density tape light that glows warmer as it dims. For outdoor or wet locations, this tape light convincingly replicates the warm, familiar glow of incandescent light with the simplicity of a two-wire LED tape light installation. -
SLIM Channel
Classic low profile for most tape lights. Includes all components for assembly.
-
SQUARE Channel
Sturdy profile with many mounting options. Includes all components for assembly.
-
45º Channel
Sturdy angled profile. Includes all components for assembly.
-
OMNIDRIVE® Basics - ELV Electronic Dimmable Driver
Compact electronic dimmable (ELV) driver for everyday projects. Compatible with the most popular dimmers. -
VALENT® RGBW Wet Location
Bright, saturated RGBW tape light for high performance color changing applications. Capable of billions of color combinations, plus pure 3000K white light. Suitable for wet locations (IP65). -
Commercial Grade Plug-In Driver Adapter
Driver for on/off, PWM dimming, and color-changing applications. -
COVE 120V LED Fixture
120V lighting system with five built-in CCT options. Every fixture can be freely switched to a color temperature of your choice. -
COVE 120V LED Fixture Accessories
Accessories for COVE 120V lighting system with three Five built-in CCT options. Every fixture can be freely switched to a color temperature of your choice. -
A3 Channel
Minimal profile for diverse applications. Architectural-grade lenses for optimal diffusion and light performance.
-
S45 Channel
Rounded corner channel that diffuses our most popular tape lights. Dotless effect when used with high-density tape lights. -
S2 Channel
Medium size channel that fully diffuses our most popular tape lights for a dotless effect. -
A2 Channel
Sturdy profile with many mounting options. Includes all components for assembly.
-
STREAMLITE™ RGBW
Dot-free and color changing (RGBW) linear lighting that delivers vibrant and saturated colors. Ideal for tight spaces, this tape light ensures simple, impactful installations with the potential for billions of color combinations.
-
STREAMLITE™ Tape Light Kit
Experience dot-free linear lighting with STREAMLITE Tape Light Kits, designed for flawless, discreet illumination, perfect for compact spaces and effortless installations. -
LED Tape Light Kit
Make purchasing tape light simple with a kit containing our most popular combinations of tape light, drivers, and accessories. -
LINAIRE® Flex Top Bend / Side Bend
Flexible architectural light to fit any space. Water resistant with precision light quality and full diffusion for a dotless look.
-
LINAIRE® Flex 3D
Flexible architectural light that bends in all directions to fit any space.
Water resistant with precision light quality and full diffusion for a dotless look. -
LINAIRE® Flex Mini 3D
Small, flexible architectural light that bends in all directions to fit any space.
Water resistant with precision light quality and full diffusion for a dotless look.
-
LINAIRE® Flex Tube 360
Round, flexible architectural light that bends and emits light in all directions.
Water resistant with precision light quality and full diffusion for a dotless look.
-
LINAIRE® Flex Micro Side Bend
Diminutive side-bending architectural light for accents, millwork, and tight spaces. Water resistant with precision light quality and full diffusion for a dotless look.
-
OBD™ Flex Optics
Flexible linear lighting with on-board optics for grazing, wall washing, and architectural accents.Suitable for wet locations IP65.
-
A1 Channel
Precise, patented channel with integrated wire management for seamless linear light.
-
BROADWAVE® LED Wall Washer
Delivers RGBW full-color illumination up to 4 stories and daisy chain up to 30 fixtures for small to medium sized lighting applications. -
REIGN® Low-Voltage Dimmer Switch
REIGN Wall Mount LED Dimmer Switches are the stylish companion for inline dimming capability from non-dimmable drivers. -
Plenum and In-wall wire - two conductor 20AWG
Plenum and In-wall wire is a robust wire for use in dry, wet, or buried applications. Resistant to oil, gas, UV, and acid. -
EQUIFLUX® Pop-In Fastener
The EQUIFLUX® Pop-In Fastener is the best and safest way to mount your EQUIFLUX light to a surface. The polymer material will prevent mounted surface damage on the light, unlike metal screws or bolts that can pose a hazard to the light and its functionality.